I need driver so that I can tranfer files from my vn-2100pc olympus voice recorder, why is there no download centre for this ??

Do you need the software/drivers for the VN-2000PC or the VN-2100PC? The software for the VN-2100PC is available here: http://www.olympusamerica.com/cpg_section/cpg_support_downloads.asp?id=1270 . Select your OS and you'll find the software.

The VN-2000PC doesn't connect to the computer via a USB port. To transfer your files to a computer, connect the earphone jack to the line In (blue) jack of the computer with a 3.5mm to 3.5 mm audio patch cable. Use a program like Audacity to record the audio track during playback. Make sure to set the Audio input to Line In. (In Windows 7, click Start > Control Panel > Hardware and Sound. Under Sound, click Manage Audio Devices. Then select the Recording tab and set the input device.) Then set the recording device in the software as well. Click the Record button in the software and then start the play back on your VN-2000PC. You should see a flat line for a bit then see a wave form start. If the line stays flat, you haven't set the Line In device properly.

I hope this helps.

Cindy Wells

You may download the Win7 driver here.

Download the Windows 7 driver here.

http://www.olympusamerica.com/cpg_section/software_results.asp?id=1270

You may download the Windows 7 driver here.

You can down load every thing regarding Olympus VN- 2100PC from the following links.

Quickly find answers online to the most common questions specific to your product.
- VN-2100PC FAQ's
Instruction Manuals & Brochures
The complete set of documentation of your product. Most manuals are available for free download or you can purchase a paper hard-copy.
- VN-2100PC Instruction Manuals
- VN-2100PC Brochures
Software Downloads
Find program patches, software drivers, or firmware updates for your product.
- VN-2100PC Software Downloads
Accessories Guide
Discover a variety of compatible accessories for your product.
- VN-2100PC Accessories

I hope this will solve your issue.

Goodluck

If my solution proves useful please rate me.

Regards
Arjun

Digital Wave Player (2.0):
http://www.olympusamerica.com/files/DigitalWavePlayer.zip
After unzipping the file, click on the SETUP.EXE file to begin installation.
Download update: http://olympusamerica.com/files/DWPUP2EN.zip
Download update 2.1.3: http://olympusamerica.com/files/DWPUP4EN.zip
Do not have recorder connected until all software installed and then reboot computer. Once computer rebooted then connect the recorder.

make sure there driver has been installed by checking out device manager on your computer... may just need to update driver

Accessed Olympus site and downloaded new driver update to clear problem.
Now working perfectly

check out this link, i had exactly the same problem but this blogger has a working patch for the vn-2100pc and vista - works fine now!!

http://blog.ironguard.net/2007/06/olympus-vn-2100pc-and-windows-vista.html