At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
you can try troble reset, turn off printer and turn it on again holding utility key, then push troble reset and restart.you can try troble reset, turn off printer and turn it on again holding utility key, then push troble reset and restart.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I presume that you want to know what this code means rather than just telling us that you have it!! Search online for "error code c2555 Konica Minolta". Try the fourth hit and onwards.
Depends on the error code. Most codes can be reset by switching off the MAIN power switch. NOT the one up on the control panel. If the code initially resets then comes back then there is a problem that must be repaired before reset will occur. There are a few codes that must be reset using the service mode or a specific reset procedure. If you can post the error code then we can tell you what the code means and a possible solution/reset procedure.
Thanks,
Wheatland Services
tis error means abnormal tonder density in the balck image unit take the blacke image unit out and shake it while holding it level and put it back in the machine to reset the error code leave the machine on and open then close the front door
Hi Wazza,
CFB58 relates to an internal bus error on the MFP control board. To reset you simply turn the machine on/off (main swithc inside front door) If the fault reoccurs, you may need an engineer to flash your firmware/replace the MFP control board.
If it's the latter, I suspect it will be more cost effective to replace the machine. Average cost of a MFP board for your model is £1200.00
Hope this helps
Regards
Taminol
didn't find this code, so dis you read the code correctly and is the model write. you can try troble reset. turn off printer and then on again, holding utility key down. push trouble reset, and reboot again.
×