94 e150 no remote can't get starter to unlock help

https://www.google.com/search?q=94+Ford+E150+door+lock+wiring&tbm=isch&source=univ&hl=en&sa=X&ved=2ahUKEwiFhZPfv93oAhWOiFwKHTxTAzMQsAR6BAgHEAE&biw=1205&bih=570


https://www.youtube.com/watch?v=mqQrCwpj2pI

your key fobs need to be reset to the car alarm again u tube how to set fob to you car , keep in mind if you have a 95 car it may have been made after july of 94. you may need to use the year before if your year don t work

there should be a relay and a fuse for the locks and the windows

It probably needs to be re-programed
I have a viper model 5101 and this is how you program it Hope it helps !

Programming the Viper Remote Starter 5101

Unlock the doors before starting

Push and hold f button for 8-10 seconds until amber light is on solid

Push Remote start button for about 4 seconds till amber light flashes 3 times

Put key in IGN to the on position but don

its the problem in the wiring connection or the battery is got weak in rs1100e .check out the connections again.for more detailed help please click on the link directly http://www.bulldogsecurity.com/pdf/ModelsRS1100_1100E_114.pdf This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya.

Mine is doing the exact same.

Have two solutions, will try it later today:

1. Unlock with remote tnen lock with key and then unlock with key.
2. Might be a power problem, check that batery is good.

IF CAR DONT CRANK CAN BE THAT BATERY IS EMPTY, STARTER OR IGNITION SWITCH. IF ALARM SISTEM IS ORIGINAL TRY THIS: CLOSE ALL DORS AND HOOD, TRUNK AND LOCK AND UNLOCK PASENGER DOR WITH KEY. THIS RESET THE ALARM (IF BATERY IS DISCONECTED)
MARKO

this function is preformed through the Body control module, this can be tested for faults by the dealer only.

On most car batery"s there is corrosion, on Jaguar,you don't see it. Take off neg- post cable first than pos, and clean posts and cables with a battery. post cleaner. kgb

I have a 2003 sierra and my remote starter would not work, it would lock and unlock only, checked out this site found the solution, tried it and in two seconds i solved the problem, Just press the lock button and the start button and viola it works again, thanks for all your help , GGGreat site glad i found it John