Light and display work but not unit or turntable

• 1.8 CF Oven Cavity
• Electronic Touch Controls
• 950 Watts
• Display On/Off Yes (option pad)
• Add 30 Seconds Instant-On
• Cooking System CircuWave®
• Defrost - Auto / Time / 1 lb. Quick Defrost
• Delay Start
• Express Cook Instant-on 1-6 minutes
• Instant On Controls
• Micro / Time Cook I & II
• 10 Power Levels
• Wire Oven Rack
• Cooktop Lighting - Bright/Night/Off
• Demo Mode
• Interior Oven Light - Halogen
• Night Light (option pad)
• Child Lockout
• Easy Mount Installation
• Exhaust Fan 3 Speed Plus Boost (315 CFM)
• Cooking Complete Reminder
• Timer (On/Off)
• Reminder (24 hr)
• Sound Volume Control - 4 levels
• Sensor Controls
• Beverage Instant-On
• Popcorn Instant-on
• Potatoes Instant-on
• Reheat Instant-On
• Sensor Controls
• Vegetables Instant-on, 3 pads (canned, frzn, fresh)
• SmartControl System
• Clock Plus AM/PM pad
• Concurrent Programming
• Custom Pad
• Electronic Scrolling Digital Display - 2 line
• Help Pad
• Variable Scroll Speed - 5 Speeds (Options Pad)
• 14.25 " Turntable - Glass Recessed
• Turntable On / Off
• 2 Wire Oven Racks; 2 Positions
• Recirculating Charcoal Filter Kit JX81B

There are door switches and one of them is evidently out of adjustment or the little actuator arm on it is.

you have a couple bad switches

first suspect is the inverter board (power) and magnatron a distant second----in either case the part involved unless an expensive unit is pricey.

You have a bad door switch that will need to be replaced.

your magnetron might be out. its what heats

Is this the unit with the door that swings down like a conventional oven?? I think it is. This sounds like a door switch but could be a magnetron or cook relay on the control PCB.

Hi! the problem you have mentioned indicates that your microwave magnetron is not working. check for blown fuse.

We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid in about a week.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Details of our service and critical safety information and disassembly information is at our site, and our link is at our listing here on FixYa.

Feel free to contact me directly (and please remind me of your full model number) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
[email protected]
http://www.microwavedisplay.com