I am trying to add channeles to my daughters tv. I picked up a pl9125c221 at a flee market to let my daughter play her wii. the problem is that i can not program the tv to channel 3. when i push the menu button all i get is the cc menu and timer menu and exit as my choices

Hello
If you can buy one NTSC to PAL converter, you can use this device with your TV which has only PAL system. But it will be very difficult to get it from New Zeland, as these type of device will have no market at your country, and the no dealers will stock it of sell it. I assumes that your daughter is now in US or other countries, whch have only NTSC system adopted for both transmission and reception. Just ask her, whether dhe can get this type of device there. OK.

you should have a warranty on the machine? it could be a number of things did you set the video setup to you tv? sometimes it just a lack of the machine trying to compansate for the tv.

Fiend your solution direct from nintendo. Here is your solution....
http://www.nintendo.com/wiiconsole/prob676ijt65/solution


nilkhet9

The LCD panel which is responsible for the picture is toast. You will need to replace it. You can have it repaired using a TV Repair guy but often it costs as much as a brand new LCD.

I recommend just finding the best sale you can and buy a new one.

My daughter broke my $1,600 LCD. It would have cost $1,200 to fix.. so I just bought a new one.After that I picked up a TV screen protector called TV Armor http://www.tv-armor.com Its designed to protect the TV from damage. Now I dont have to worry anymore when she is playing near it. It works really well.

Eric

Fiend your solution direct from nintendo. Here is your solution....


http://www.nintendo.com/wiiconsole/prob676ijt65/solution

aqwtr-3

no i dont she might have to start over sorry

I have the same problem with my Emerson VCR. When the ADD button is flashing, just press the menu button to exit the menu. It will add. That's the only thing I know to do. Sometimes it works, sometimes it doesn't.

try to reset the channels in tv or add the channels

if the audio works for regular tv

check to see if the av cable is in properly
or if the red and white leads are plugged in

Red and White leads

Scart

Nope.
You can transfer the photos to a SD card, then plug the card into the SD slot of the wii, then upload the images to the Wii's photo channel.