The cursor on my AUSUS U50A is frozen. All other functions seem to be OK. How do I unfreeze the cursor?

Hi Julia.

Have you tried restarting your computer? The manual for your device shows there's a keyboard command to turn the cursor on or off.

Fn + F6

I've attached the manual for your reference, below:

http://www.lenovo.com/shop/americas/content/user_guides/g470_g570_g575_ug_en.pdf

Hope this helps!

If you are saying your laptop shuts down when you remove the power cord then that's a sign that your battery is dead.

Batteries only have a useful life, then after that they have to be replaced. Once the useful life is up, most times the battery will not take a charge.

Some batteries will take a charge and say they are at 100% but as soon as you remove the power cord it doesn't take long before it is drained at 0%.

It's simple to Unfreeze the Phone,You can buy the UNFREEZE code for YOUR samsung D900i phone from the site Simpleunlocking.com at reasonable cost and unfreeze it,you can get the Unfreeze code for Europen country Samsung Phone there.They providing Unfreeze code under samsung-europe-unlocking-service.

If your Phone Freezed or frozen means it's samsung mobile?am i rite...If so means You need to Unfreeze it,you can use the Unfreeze Code to Unfreeze the Phone,You can get the Unfreeze Code from here
Wickedunlock and Unfreeze it...

You need to Unfreeze Code at here
http://www.mobile-unlocker.com/nokia-c7/rs2wp9/ and Unfreeze it....

try to reinstall driver first, it may fix your problem

Hi there,

You just needed to reset your ipod by pressing and holding the MENU and the CENTER buttons at the same time. Wait for the apple logo to appear.

Please let me know if you are able to do this successfully. Good luck!

try with another mouse.

well..restart the machine...and we are assuming you are saying the touchpad is inoperative..open control panel, then system, and uninstall that Human Interface device..then have windows look for plug and play devices..should reload..you may need a usb mouse in the meantime..

Have you tried pressing <FN><F9>