With your help we were dounloding the instalation of my PRINTER 6200in the vista sistem But can not install in the computer. Please Help

hi

go to this link -- self help to install, use and maintain

http://www.lexmark.com/publications/eng/e120/

hope this help

yours is not compatiable with vista

Photosmart printers are not necessarily plug and play. It requires you to install their software and drivers before you attach the printer to your computer. You will be instructed when to do so.

Disconnect the printer USB cable. Place the photosmart disk into your cd drive., this should autostart. Follow the instructions. It is not a fast installation but it is not difficult.

Good Luck.

Go to Lexmark website to download the print driver. You may be able to find the the complete install file there also. If the printer is extremely old there is a very good chance it may not work with Vista. Hope this helps and good luck!

Have you tried installing the software the printer came with ?

Here's the LexMark driver for Vista from there website
Click HERE

Install the appropriate driver, and reboot

Please go to this page and download the Garmin driver and install it.

http://www.sharc.net/nuvi_links.htm

- Jim

HP PSC 1410 All-In-One InkJet Printer installation

i lost the software of psc 1500 all-in-one can you help me?

Did you just install windows Vista?? If you did, disconnect the printer from the computer and reload the lexmark driver. Windows will pop up a message saying that it doesn't recognize the software being loaded. Click to load anyway. The instructions will tell you when it is ok to connect the printer.

Vista tries to install istall its own driver for anything you connect to you computer. Always install the products driver before installing the device.

Hey guys,, Well you can try this and this will help(by all means it should)

METHOD 1
restore your system to a previous date (one before you installed the printer off the xp cd)
Install the driver's using the windows vista drivers..

METHOD 2(RECOMMENDED BUT MORE DIFFICULT)
THE FIRST THING IS TO REMOVE THE OLD DRIVERS

ensure your printer is connected to your computer and the power is on

step 1.) click start / right click computer and select properties
2.) click device manager

or START / Controll panel
Click Classic View the device manager

3.) Click View then show hidden devices

4.) right click on the printer and click uninstall

5.) Unplug your printer usb from your computer

6.) RESTART

7.) INSTALL THE PRINTER WITH THE VISTA DRIVERS YOU DOWNLOADED..

ps REMEMBER NOT TO PLUG IN YOUR PRINTER UNTIL THE SETUP SOFTWARE TELLS YOU TO DO SO

BTW IF YOU CONT HAVE THE VISTA DRIVERS YOU CAN DOWNLOAD THEM FROM THE MANUFACTURES WEB SITE

let me know if you got any problems ..