Lamp change Hi I have substituted the lamp on my SONY VPL-CS5 and after that the red light still blink "change lamp" what can I do to fix it ? there's a Reset Button? I tried the reset on the remote, but it does not work. thanks

If your Sony VPL-CS5 Red LCD isn't working, you may need to replace the lamp. You can purchase a replacement lamp from the manufacturer's website or from an authorized retailer. You may also need to check the power cord and connections to ensure that everything is properly connected. If the issue persists, you may need to contact Sony customer service for further assistance.

light is in red means standby mode.
Flashes in red - The projector is in abnormal status. Symptoms are indicated by
number of flashes. Address the problem in accordance with the
following. If a symptom persists, despite having taken measures below, consult with qualified Sony personnel.

Original lamp for cs5 USD100

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited
Mobile: 0086-13178867858
Wechat ID: 008613178867858
Whatapp ID: 008613178867858
Skype: [email protected]
http://www.lampdeng.com

That could indicate the following-

1. The lamp cover or filter cover aren't properly closed. Try shutting the projector down> opening both covers> closing them> restart

2. The lamp is nearing the end of its life or is faulty and you'll need to replace it.

to clean the lamp: no chemicals, nothing abrasive. you can touch the outer glass (not with your fingers), but do not touch anythjing inside the bell. best thing to use is a microfiber cloth. your lamp is nearing or has passed 2000 hours of use. the projector is telling you to replace it before it blows (and sometimes shatters). after you replace it, reset the lamp timer (through the menu).

HI
Not sure if its in the handbook but you can download a copy from here

http://safemanuals.com/user-guide-instructions-owner-manual/SONY/VPL-CS5-_E

You need to clean the filter , the unit is shutting down so it doesnt over heat..look for online manual on how to remove filter and blow off dust.. Good Luck

the cover switch is probably not fully made.
Ensure that the cover tangs are pushing the pin
on the miniswitches.
Try putting slight pressure on the fan or lamp cover to see if the lamp/cover light
stops flashing.
you will need to do a restart on the PJ to check this out

Hi,

Pls open the Lamp unit and check it if it is giving the power indication on the panel.

Viren

probably the lamp could be failing
or check the fan'lamp cover switches are being 'made'