Where can I get knobs for a Tascam 2488 MKII. Trim knobs

https://tascam.com/downloads/tascam/353/2488_1.00Messages.pdf

That seems to be in the midi time sync functions. In cakewalk under options find the midi settings and choose midi device. All of you clock and sync settings should be there. Also I think under the audio menu there are settings for folders and I think a tab for sync is there as well. I use Sonar, which is an upgrade of cakewalk but used cakewalk for a long time. I have it on another computer and will look later to see if I am forgetting something or remembered it wrong and let you know.

do you have the metronome turned on if so turn it off. the clicking is your bpm measures .

I think if you had the manual you would know the answer.

Register and download the manual for free at audio.manualsonline.com

Search for "Tascam Portastudio 2488"

http://music.manualsonline.com/manuals/mfg/tascam/2488neo.html

I think if you had the manual you would know the answer.

Register and download the manual for free at audio.manualsonline.com

Search for "Tascam Portastudio 2488"

http://music.manualsonline.com/manuals/mfg/tascam/2488neo.html Page 118... Press NO/EXIT and check the digital audio source. The output should be 44.1 kHz (note that some players output 48 kHz). A unit with varispeed (pitch control) may have varispeed turned on, altering the sampling frequency from 44.1 kHz.

Yes, you should be able to go direct into the recording input if your guitar has a preamp in it and the 2488 may have adequate gain to even accept the input from a passive guitar.

This is a common problem and I would recommend searching the forums on VSPLANET.com where they have all sorts of info and discussions about recording.

Read page 19 under Monitor section.You have to assign the signal to the monitor output you want. Page 36 has the details. All the info you need is here with some updates:http://www.korg.com/product.aspx?pd=191

There is likely an amplitude setting (probably available in a menu) for the click. Make sure that is turned up.

The Tascam has no midi In,Out or Thru so the answer is No.