HOBART AM14F wiring diagram

Question moved from Cars and Trucks to Hobart Oven.

It looks to be an Australian oven that is a copy of the Rational Combi Oven. I can't find a manual, but see if this link works better for you because Fixya is in North America.

https://www.google.com/search?q=hobart+ecocombi+hecmee6+manual

Or contact them

HOBART Food Equipment AUSTRALIA - Phone 1800 462 278 / www.hobartfood.com.au NEW ZEALAND - Phone 0800 462 278 / www.hobartnz.co.nz

..

Any appliance store that deals with Hobart can get you what you need. You should also be able to go to the Hobart site and find what you need.

you must understand this : your electric oven must be indicate if it is a single phase( use 3 wires for 230 2 hot wires + 1 Neutral see the diagram like dryer? you must sure about this. Normally any appliance for home are single phase NOT 3 phase.

2) If you electric oven, say 3 PHASES( use 4 WIRES, 3 hot wires+1 Neutral wires) this for industrial application +comercial NOT for home

However if you system is 3 phase you must need to install 3phase transformer.

Hobart, the parent company of Baxter are very picky with releasing manuals, diagrams, etc. Your best bet is go to the link below and create a user name and see if they give you access to the manuals.

https://feg.hobartcorp.com/CookieAuth.dll?GetLogon?curl=Z2FresourcecenterZ2FPagesZ2FInstructOperManuals.aspx&reason=0&formdir=2

looking for a wiring diagram for hobart hr7 rotisserie oven

It can be done with a transformer, 480/ 240 single phase transformer to get the lower voltage. Then the oven will require some wiring changes to get all the elements and controls connected to two hot wires instead of three. The transformed will be sized to the wattage rating of the oven. This is a only basic description of what needs to take place.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

You'll be required to register, but there is a printable manual available here. http://www.hobartservice.com/Manuals/

Hope this helps

try http://manualcore.com

jeff,you can try calling hobart in ohio to get them to email you install,and operating instructions, i would think they would do that for you

The only difference should be the elements. Consider installing a buck-boost transformer. It may be cheaper.

The Hobart part number for the 240 volt element assembly is --
# 342170-00002. Your local Hobart can get you a price.