Need manual for GE Profile

Hello, Jacque -

GE provides a website which offers owner's manuals. This is the link: https://www.geappliances.com/ge/service-and-support/literature.htm . You will need to enter the model number for your microwave/convection oven to find, save, and print the manual.

Best wishes.

Probably is the fan tapping something. Power it down/DISCONNECT power. pull unit and if there is a cover, remove it. look for the convection fan and see if it free-spins. should find spot where it is hitting and could be adjusted.

Cook using microwaves or convection in this stylish microwave oven that allows your food to be flavorful beautifully browned and cooked quickly .now your microwive didn't work .you should take it to fix .
home light bulbs

GE has the manuals for most of their appliances on their site: http://www.geappliances.com/service_and_support/literature/ . Just enter the model number and click Submit.
The direct link to the manual for the JVM1790 Over-the-Range Convection/Microwave oven is here: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40480-1.pdf . GE only lists the JVM1790CK, JVM1790BK, JVM1790WK and JVM1790SK.

I hope this helps.

Cindy Wells

You can download GE owner's manuals and installation instructions here.

You can find helpful exploded view diagrams and order parts for GE by entering your full model number from the tag on the oven here.

For other brands, you can find links to helpful exploded view diagrams and part ordering help here.

I recommend that you bookmark that link to your favorites.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Clean out the cabinet above the micro wave and you will find 2 or 3 bolts that secure the unit (MW) to the bottom of the cabinet. They will normally be towards the front of the cabinet.
I always put a towel or cardboard over the surface of the range for protection and a place to set the MW once it is ready to come down.

Have someone either hold the MW up by putting pressure upwards on the front of the MW or take the screws out. (don't forget to unplug the MW)
Gently let the front of the MW fall forward about 6" to 8" and lift the back of the MW upwards and it will release from a mount that is attached to the wall.
You may feel a little resistance as it might be duct taped to the exhaust going up or out the back.
Be aware that these older micro waves can be a little heavy and it is recommended that 2 people are used to do this.

magnetron may be defective . replace d magnetron

Try the web site www.partsdirect.com If this has been helpfull for finding what you wanted, please rate my solution. Thanks D. Lange

You probably have a bad thermistor.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

(At that site, that part is misspelled as "thermister" for your model).

There should also be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting & testing.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Accessing some components for testing will require you to remove the oven from the wall.

If so, the installation instructions are very handy, and it's best to have two people since the microwave can be heavy and awkward.

You can download GE owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Hi,
Here is a tip that will help you to figure out what is wrong with your Microwave Oven....

Microwave Oven Basic Troubleshooting Tips
http://www.fixya.com/support/r5508031-microwave_oven_basic_troubleshooting

heatman101