My Viper 791xv remote isn't receiving the page information from the unit in the car. When I press the unlock, lock, or remote start button, it works, but then the remote beeps as if it didn't work (3 sets of 2 quick beeps). And the remote still displays the unlock button no matter what. I have tried to re-learn the remote, but that didn't work. Any help would be appreciated! Thanks!

Question 1

2helpful

3answers

Need operating manual for viper ce 0890

The asterisk button controls the remote starter feature. Press and release one time, wait. The parking lights should flash confirming that the unit received the command. If pressing the button one time doesn't work, try two times.

Jan 24, 2013 • Remote Start System

0helpful

1answer

I have a viper model 791xv. I used one remote last night and it worked fine. Now neither remote/responder work. The red light still comes on when pressed but nothing happens. The other remote beeps...

have you tried changing the battery? also does the central locking work by the key or inside the car button?

Jan 14, 2018 • Remote Start System

1helpful

1answer

I had to replace the battery in my car and now my remote will not do anything lock or unlock the doors start the vehicle or pop the trunk what do i do?

Reprogram the remote: turn ignition on, press and release valet switch one time. Press and hold valet switch. While holding valet switch, press lock button on remote. The alarm should chirp to confirm entry into the programming mode (when you press and hold the valet button) and when you press the lock button. Turn ignition off. Test remote.

Jan 24, 2011 • 791XV The 791XV is a 2-way Security and...

0helpful

1answer

The remote pad stop unlocking and locking doors. not recieving signal

there was a recall on these units for the antenna. Unplug the antenna on your windshield, let it sit for 5 minutes then plug it back in. You will need to contact your authorized dealer to replace it under warranty if you are the original owner of the system.

Aug 02, 2010 • 791XV The 791XV is a 2-way Security and...

0helpful

1answer

Lights stopped flashing when i hit the lock or unlock button?

CHECK FUSE

Jul 20, 2010 • 791XV The 791XV is a 2-way Security and...

4helpful

1answer

Viper remote stopped working 791xv

I have the same remote and it comes disconnected in the battery section from the battery hitting it and then the commands and speaker stop working
as shown here

Mar 18, 2009 • 791XV The 791XV is a 2-way Security and...

3helpful

1answer

Got a new remote for my viper 791XZ and reprogrammed it .

this usually means that the remote did not recieve a signal back from the module or the module did not recieve the remote signal
have you tried repeatively to press the unlock button? does the remote starter work or aux( trunk ) ?
also when putting the battery in the remote , be easy because there is a connector plug soldered on the board real close to where the battery is , and if it is hit by the battery hard enough it will cause those solder connections to disconnect and you will get the beeps and or other malfunctions

Jan 31, 2009 • 791XV The 791XV is a 2-way Security and...

2helpful

2answers

Car is completely locked down

Let's hopethat the installer actually put in the valet switch for the Viper! Lcate the valet switch. ALWAYS put mine down by the e-brake lever under dash. (I assume that the alarm is going off? If not, go to next step.

Find the alarm/start brain under dash. Unplug main 6 pin 12 gauge wire harness. Wait 5 minutes, then re-appy the power plug. Alarm "may" go off, then try again.

Hit me back if you need further assstance. TTYL

Larry T
Winona Lake, IN

Jan 28, 2009 • 791XV The 791XV is a 2-way Security and...

1helpful

1answer

Viper remote 771xv works, but gives three steady tones at regular intervals after using.

That means that your remote is not receiving a signal from the remote starter. That's a two-way unit designed to transmit(tx) and receive(rx) signals to and from the antenna or brain. If it doesn't do either one, the remote will give you three triple beeps.

Jan 01, 2009 • 791XV The 791XV is a 2-way Security and...

0helpful

1answer

Driver's door won't unlock with remote

This may be a problem with wiring. I will need to know what the make and model is of the car. Also keyless entry system stock OEM or was that an option you have added? Lastly, did you install this system or was this installed by a cetified DEI corperation?

Thank you,
Luis

Dec 02, 2008 • 791XV The 791XV is a 2-way Security and...

Question 2

Anonymous

Contributor 1 Answer
Posted on Jan 19, 2010

Anonymous

Contributor

Joined: Jan 19, 2010

Answers

1

Questions

0

Helped

1510

Points

4

My battery ran low and I jump started my car which some how caused the problem. My viper technician made me a buy new remote but the problem continued even with the new remote.
Try disconnecting the battery of your car for ten minutes and then reconnecting it. It worked for me. Now i have a extra remote which i don't need.

Answer 2

Anonymous

Contributor 1 Answer
Posted on Oct 14, 2009

Anonymous

Contributor

Joined: Oct 14, 2009

Answers

1

Questions

0

Helped

1510

Points

1

Im having the same exact problem just started this week... no clue what happened. still working on a solution

Testimonial: "After reading some online forums, it seems to be a faulty remote. It's not getting the signal from the unit. I have a second remote that works fine."

palmerrider Jul 30, 2011

Same thing here! Been through 3 remotes because of this issue.

×

Answer 3

Stephanie ling

Contributor 1 Answer
Posted on Feb 19, 2015

Stephanie ling

Contributor

Joined: Feb 19, 2015

Answers

1

Questions

0

Helped

1510

Points

1

I tried removing the battery and it didn't work. Does anyone else have any ideas?

Stephanie ling Mar 03, 2015

Turns out the "brain" of the alarm was not working. Bought a new one on ebay, had it installed and it works perfect.

×

Answer 4

Anonymous

Contributor 1 Answer
Posted on Jan 31, 2010

Anonymous

Contributor

Joined: Jan 31, 2010

Answers

1

Questions

0

Helped

1510

Points

1

Rcson, do you want to sell your remote?

Related Topics:

4 Answers

Anonymous

Anonymous

Stephanie ling

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Need operating manual for viper ce 0890

I have a viper model 791xv. I used one remote last night and it worked fine. Now neither remote/responder work. The red light still comes on when pressed but nothing happens. The other remote beeps...

I had to replace the battery in my car and now my remote will not do anything lock or unlock the doors start the vehicle or pop the trunk what do i do?

The remote pad stop unlocking and locking doors. not recieving signal

Lights stopped flashing when i hit the lock or unlock button?

Viper remote stopped working 791xv

Got a new remote for my viper 791XZ and reprogrammed it .

Car is completely locked down

Viper remote 771xv works, but gives three steady tones at regular intervals after using.

Driver's door won't unlock with remote

Not finding what you are looking for?

791XV The 791XV is a 2-way Security and Remote Start system. Th

Need operating manual for viper ce 0890

Ask a Question

Top Viper Vehicle Parts & Accessories Experts

oneStan

ZJ Limited

Brad Brown

Are you a Viper Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

4 Answers

Anonymous

Anonymous

Stephanie ling

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Need operating manual for viper ce 0890

I have a viper model 791xv. I used one remote last night and it worked fine. Now neither remote/responder work. The red light still comes on when pressed but nothing happens. The other remote beeps...

I had to replace the battery in my car and now my remote will not do anything lock or unlock the doors start the vehicle or pop the trunk what do i do?

The remote pad stop unlocking and locking doors. not recieving signal

Lights stopped flashing when i hit the lock or unlock button?

Viper remote stopped working 791xv

Got a new remote for my viper 791XZ and reprogrammed it .

Car is completely locked down

Viper remote 771xv works, but gives three steady tones at regular intervals after using.

Driver's door won't unlock with remote

Not finding what you are looking for?

791XV The 791XV is a 2-way Security and Remote Start system. Th

Need operating manual for viper ce 0890

Related Topics

Ask a Question

Popular Questions

How to program a 7752V

Need operating manual for viper ce 0890

My led light for my

I need a manual for viper 479v/p/c 2 way remote

Disable viper alarm

Top Viper Vehicle Parts & Accessories Experts

oneStan

ZJ Limited

Brad Brown

Are you a Viper Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Manuals & User Guides