LCD Screen stopped working on camera.

this white blank screen is actually an issue with the lcd ribbon wire not making contacts.what you can do that at times able to resolve this issue is to tap and put some pressure on the sony logo or mark at the bottom of the lcd screen.if it doesnt work, service might be required.hope this helps.thanks :)

remove battery and or reset by inserting paperclip in reset hole near battery. try formatting the stick if this doesnt work. you will lose all saved picts so back up picts. to cpu

Hi, Some leads from the display wires are cracked or broken, if you are accurate enough you can replace it by yourself otherwise bring it to an repairshop.

regards Rob Rotronica

Hi

The Digital Rebel XTi doesn't have 'live view' mode, you can't see what you're taking a picture of before you take the picture.

Thomas
Darntoothysam com - Digital camera parts and repair.

ok casio luver you have eather a broke lcd or a damaged main board. visit www.digitalcamrepair.com for more help.

Does the camera take good pictures? Have you tried downloading them into a PC? If the pictures look OK on the PC but not on your camera's LCD screen, then the LCD screen is most likely defective.

Please read this article that I wrote regarding LCD screen replacement.

http://www.fixya.com/support/r370257-replace_defective_lcd_screen_in_kodak

It sounds like a bad connection on the ribbon cable of the LCD screen to the camera's motherboard. The fact that when you physically move the camera around and you can get the screen to then work, tells me something is loose inside.

Good luck!

- Jim

Your camera works just like a film camera SLR,. You use the eyepiece to frame and focus your picture. The LCD screen is for reviewing pictures taken or menu operations. You cannot preview a shot on screen before it is taken with the camera.

Have you tried the 'Menu' button? If you've turned off 'Review' in the settings menu, the screen doesn't show anything after you take a picture. If the screen doesn't come on when you push the 'Menu' button with a charged battery installed, your camera will need to be repaired.

If you can display pictures in playback mode but screen is black in capture mode then the CCD sensor has stopped working and needs replacing.