Konica Minolta biz hub c350 malfunction code c-0b4c

To reset the malfunction code press follow keys:
Turn OFF the copier,press and hold pressed the Utility key and turn ON the copier.Wait will apaire the Trouble reset message on the display and release the Utility key.Touch the message and turn OFF the copier.Wait 1 minutes and turn ON.Good luck.

konica minolta bizhub malfunction detected error code c-0200

eror code c-0098 meaning ??????????????pls tell me the solution

This is a hard disk error. Time to have a tech come out and replace it.

Hi katienash,

C-0F36 on the bizhub C350 means the machine has registered a really low toner density in the Black
Imaging Unit. I'd take the unit out, give it a shake and pop it back in. Also worth checking you have some Black Toner in it.
Good luck

Regards

m-press.biz

konica minolta biz hub 920 error code sc 52-09

whats the code? Then i can help.

There is not a C0876 listed in the service manual. Perhaps it's a C0B76 - Finishing option Punch Unit Board Malfunction.
CAUSE: The shaft on which the gear rides is deformed. The punch unit cannot be driven from front to rear.

SOLUTION: Reform the shaft toward the punch unit rail. This will allow the drive gears to mesh properly so the punch unit can be mechanically driven from front to rear.

Error code C0520 on Konica Minolta biz hub c-350??

Code C0F36 is a low toner density error on the black developing unit.

Was it asking for black toner before this code appeared?