My Cuisinart CMW 200 is completely dead. No lights when plugged in. Fuse looks intact.

SOURCE: Cuisinart CMW-200 Oven remains on and will not

Replace the door interlock switches. One is jammed on.

SOURCE: cuisinart microwave cmw-100 opening of

Check the door interlock switches.

SOURCE: Fuse intact in supply lead but Neff H5470NO

Dead appliance, power on wall outlet.

YOUR SAFETY IS PARAMOUNT!

Attempt this only if you are competent.

If your appliance has absolutely no functions at all, remove it from the mains supply, remove the case and see where the mains lead goes in to the appliance and follow the cable until you find the main fuse.
ONLY USE THE SAME TYPE AND RATING OF FUSE TO REPLACE IT.
The usual cause of this fuse failure is the door switches are contaminated or sticking. Check the door switches before putting power back on to the appliance.
Hope this helps.

SOURCE: I need to find the

Hello & Welcome to FixYa

You can buy the motor from here or from here. Please get back to me if you have any other questions.

Kevin

SOURCE: Cuisinart microwave CMW-100. How do I change the lightbulb?

You need to remove the cover from the oven. Pull the plug first! Remove the Philips Screws. There are two special screws that are meant to prevent your proceeding further. No standard driver will fit these screws. You can remove them with small pliers gripping the outer edge of the screw and turning counter clockwise. If you are not familiar with capacitors, get somebody who is familiar. The light socket snaps in. Unsnap it. The lamp is taped to the socket with cellophane tape. I have never removed the lamp nor do I know the number. Do not plug in the oven with out the cover!!!!!