I have a soundstream auto multimedia player (flip out) Model# VIR-7870NRB We'll my 4yr son lost the face plate to it. Is there any way I can bypass it and just use my remote control?

Vir-7022nr. How do I calibrate? - Fixya

www.fixya.com/support/t25885028-set_calibration_vir_7022nr
Sep 29, 2015 - I use a Roland 540 printer, and I have replaced chips, motherboard, and encoder sheet. ... Sep 29, 2015 ' HP Photosmart 6520 e-All-in-One -... 0 Answers. photosmart 6520 power light flashing and has white screen had a ...

[PDF]VIR-7022NR - Soundstream

www.soundstream.com/manuals/2009/VIR-7022NR.pdf

Do not expose the product to water or excessive moisture. This could ... High De?nition Digital Panel with LED Back Light ... A new disc may have rough edges on its inside @- ... Flashing image ... power . . Insulate all bare speaker Wires from. (but no/low toucmng eaCh Other or touchmg each other and chassis ground.

Soundstream VIR-7022NR (vir7022nr) Single DIN 7" TFT-LCD

www.sonicelectronix.com > ... > In-Dash Car DVD Players

Soundstream VIR-7022NR • Single DIN 7" TFT-LCD Touchscreen ... iPod Ready:Power Acoustik IC-2 IPod connection cable required and sold ..... I have purchased many items from Sonicelectronix over the past while and I am fully .... All trademarks and trade names are the property of their respective trademark holders.

lots of them examples on youtube

There are guy's on e-bay that deal in nothing but remotes

Try www.theremoteshop.com

Try pressing and holding the open/close button while pressing the reset . If you let up on the reset keep the open/close button pressed. I've heard that works but can't guarantee it. I haven't had this problem so I've never tried it. Might be a bad motor for the flip out. Hope it works for ya.

You'll have to reencode the videos to a supported codec. There are literally dozens of mp4 codecs. Try redoing them using Xvid or Divx.

hi you can try this
On the back of the head unit is a short USB female connection that comes from the back of the unit. Included w/ the head unit is a USB cable with a female and male end. Its about 6ft. I plugged the included USB cable into the unit, and on the other end of the cable I attached my 3G sync cable that came with the 3G. You dont need to use a AUX cable or AUX input although there is one on the unit. Your 30 pin 3G sync cable will charge and play music through that cable. if all fails you will need to reset your unit and possibly change cable check all connections .....hope this helps goodluck with it let me know

Here is a universial one im not sure if its what your looking for or not.

http://cgi.ebay.com/SOUNDSTREAM-Universal-Remote-Control-Model-R-1-/370359018370?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item563b1e2382#ht_2810wt_939

Try going to this page, here.

tie the park brake wire to ground permanently. This will bypass the safety feature. You can do it right at the unit., cut the wire short, and jumper it over to ground. Installers usually won't do this as it is a liability.