Have you checked underneath the reed dogs for jammed thread and lit build up?
SOURCE: replacement foot pedal and wiring for Euro Pro
Here's a place that carries all the pedals. Many are used by various brands, and go under different names for different machine companies. The euro-pro manual has the manufacturer's name and the model #, or you can browse the drawings of pedals to match your own. My euro-pro 9110 uses a model also used by viking and huskevarna. This place carries the cords as well.
Good luck.
http://sewingmachine221sale.bizland.com/store/page36.html
SOURCE: euro pro 9136 wont work
Could be the drive belt from the motor to the machine is too loose, get a new one. Will the machine turn by hand, if not, then there may be something inside jamming it
SOURCE: help me find a manual for a euro pro 7133 sewing machine
I hope this helps. It took some searching but this is what i found. Good luck!
http://www.sharkclean.com/manual/7133_REV_1204_ENG-SP-FR.pdf
SOURCE: Toyota 2260 sewing machine. When I press the foot
Chances are you have a small piece of thread stuck in the raceway, turn the balance wheel bac kwards and you may free it off otherwise take out the bobbin and bobbin case and the raceway if you have the type with a drop down gate and clear it.
SOURCE: The hand wheel is hard to turn and sticks on my Euro Pro x 8260 sewing machine and I need the manual
Can't help you with the manual. I've never found a source for a free one. As for the issue with the hand wheel ... that is usually a sign that your machine needs cleaning and servicing. (typically fluff, lint, threads, not enough oil, etc.)
349 views
Usually answered in minutes!
×