I have the error codes coming up constantly and we have gone as far to replace the fusing unit, power supply, and the LGC board. Do you have any further suggestions?
Thanks,
Brian
Did u clear the status counter ?
After repairing the matter which caused the error [C448], perform the following:
(1) Turn the power ON while [0] and [8] are pressed simultaneously.
(2) Key in "400", then press the [START] button.
(3) Change the displayed current status counter value "32" to "0", then press [ENTER] or [INTER-
RUPT] (to cancel C448).
(4) Turn the power OFF and then back ON. Make sure that the equipment enters the normal status
Did u clear the status counter ?
After repairing the matter which caused the error [C448], perform the following:
(1) Turn the power ON while [0] and [8] are pressed simultaneously.
(2) Key in "400", then press the [START] button.
(3) Change the displayed current status counter value "32" to "0", then press [ENTER] or [INTER-
RUPT] (to cancel C448).
(4) Turn the power OFF and then back ON. Make sure that the equipment enters the normal sta
Did the counter of Toshiba E Studio 445 can Backward?
3,577 views
Usually answered in minutes!
×