My kenmore dryer won't come on at all - Kenmore Elite HE4 Electric Dryer

Might want to check this out:


Kenmore Elite Sensor Smart Electric Dryer 110 65062500 Won Start...

no reset but a thermal fuse.. maybe thats the problem

Check all the thermostats for continuity.

If thermal fuse is bad, most dryers will not run. If it is bad, dryer has overheated for some reason. Check venting to be sure it is clear and be sure heating element has not grounded out.

Take a look at this troubleshooting tip for the no heat problem for your dryer.

Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

';';

dryer element. Common problem easy repair.

Timer resistance is way too low. You may have misswired the new timer. Basically, when the dryer motor is running, the timer motor gets voltage 115 volts.