How do i turn off the date/time stamp on my camera?

To set the date and time on your camera, follow these steps:

Turn on the camera and set the language and date/time by following the instructions in the Extended User Manual.
Once you have set the date and time, you can turn on the Date Stamp feature by following the instructions in the User Manual . The date and time will be stamped on all pictures taken with this feature enabled.
KODAK CD82 - EXTENDED GUIDE EXTENDED USER MANUAL Pdf Download ' ManualsLib

KODAK EASYSHARE CD82 USER MANUAL Pdf Download ' ManualsLib

If your camera has this option it will be in the settings most likely time and date.
I see no mention of your camera type so here is the proccess on a Sony camera. SONY eSupport How to turn the date time stamp feature on or off

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gregg_27a4d257e54e7920

If you do not want the date and time stamp on future pictures, turn it off:

1. Press the Menu button.
2. Use the arrows to:
   1. Select the Setup menu.
   2. Select the Date/Time Stamp feature.
   3. Turn off the Date/Time Stamp feature.
3. When you are finished, press the OK button.

Follow these steps:

1. Press the Menu button.
2. Select the Setup menu.
3. Select the Date/Time Stamp feature.
4. Turn off the Date/Time Stamp feature.
5. Press the OK button.

If you find my solution helpful, you're kindly requested to rate it. Thanks!

The menu on the camera controls the date and time stamp. Turn on the menu i camera mode, there are three choices, Camera, Settings and customize. Time stamp should be in the middle menu. Look for time settings and turn it off. All pictures have time and date always. The time/date stamp just makes it visible in the image.

Directions to switch the Date stamp off:

• Menu
• Camera Settings
• Date stamp (logo is like an old fashioned stamp)
• Choose OFF

The date stamp only works in "Postcard" resolution. Press the Func Set button, then scroll down to the bottom to select postcard resolution.
Then press the menu button. The date time stamp selection should now work. Simply turn it on.

I had the same problem. I wanted to set my Olympus C5000 Zoom to automatically date stamp photos. After going through the entire manual, I had to call Olympus directly. They told me that none of their cameras have an internal date stamp feature. They said that the date stamp lowers the quality of the picture, so they choose not to have the feature available. However, you can manually add the date and time stamp through the software that comes with the camera, just before you print the pictures. Hope that helps...
if you need help with that manual go to http://www.olympus.co.jp/en/support/imsg/digicamera/download/manual/ and get our off the list.
It is on there!!! about the middle of the page.

Date stamp is only possible when you set the resolution (picture size) at "Postcard 1600x1200" option, if the date stamp is set to "Date & Time" or "Date" option

Please spend some time in the menu item referring date stamp, date,record,time if you catch off that item.
For taking 3 pics ,You might have switched on the MULTI in the menu in camera or shooting mode