I/O card parity interrupt at F000:F188. Type ( S )hut off NMI, ( R )eboot, other keys to continue This all shows up before I even get the Windows loading screen, so I'm pretty much not past the BIOS mode right? Anyways, the main message I'm asking about here is the one with the I/O card. I just provided the rest in case it might help you guys figure out what could be wrong. EDIT: The keyboard doesn't work too. I can't even press the S or R or any keys to execute a command. Thanks again for your time
Ugly situation, as you're seeing the address range of the I/O card (a BIOS perhaps on a HBA?) and the OS/BIOS is asking you if you'd like to ignore Non Maskable Interrupts. I'd be interested if there are cards that can be removed from slots in the PC first, do so, then see if the PC boots. If you find the PC boots fine without the cards, add them back, one by one until the system stops booting. Also, now would be a great time to clean out the dust/debris inside the chassis, off of the fans, etc.
Good luck!
In most pcs you need to repair the start up. You probably have a virus preventing you from doing much of anything. Call the manufacturer and get the recovery key to push when you start it up and wipe it back to the day it came out of the box.
To get around to copy the files off before you do that try this. Press the windows key next to Alt and use the arrows on your keyboard to go up & down & left & right. If nothing happens when you press the windows key, the recover it as soon as possible.
I’m happy to help further over the phone at https://www.6ya.com/expert/wynn_5ba0205233ebfc15
To run the check disk utility you will need a repair disc or
a operating system disc. Put the disc in the cd drive and boot from
it. You want to get to the Dos Command Prompt (Black screen with white
letters) and type the following command: chkdsk /r
Check disk will run well over an hour or two and you will notice the
percentages going from high to low, this is normal. Let it run to
completion. Then reboot machine.
If check disk fails to solve your problem you might have to reinstall windows.
Try doing a Repair Install that way you don't loose your data, documents,
music, pictures, videos or programs.
In windows xp you get to the dos command prompt by selecting R for repair when
the options appear.
In Vista and Windows 7 you want to get to the recovery
console and look down at the bottom of the window for the Dos Command.
3,212 views
Usually answered in minutes!
×