Watches Logo

Related Topics:

S
Subramanian Posted on Jan 10, 2015

How to view the year in Timex Expedition mf-13? We can set the year, but not able to view that. When alarm is pressed, just month, year & day is displayed. Can anyone please help? thanks in advance.

  • Subramanian
    Subramanian Jan 10, 2015

    Sorry, It is "When alarm is pressed, just month, date & day is displayed. "

×

5 Related Answers

A

Anonymous

  • Posted on Jan 23, 2008

SOURCE: Outdoor Timex Expedition watch

Dear sir,
i bougt a watch timex expedition indiglo wr 50m from ansal plaza in shopper stop in this watch i find some nylon type of thred in this watch when i gone on there he is saying that leave it for 7 days i bougt from there on aprox 20 days before plz suggest me waht have to do
my contect no 9818190399
my mail id is [email protected]
and [email protected]

Ad
A

Anonymous

  • Posted on Feb 15, 2008

SOURCE: Timex 1440 Sports Aggressor: how to set time and alarm

hold the top 2 buttons until "alarm" no longer appears

Anonymous

  • 3 Answers
  • Posted on Aug 18, 2008

SOURCE: setting tha alarm

Press MODE (lower left) button until "ALARM" appears in the display. Then press SET (lower right) button. T1 should flash to indicate you are setting an alarm for Time 1. Press MODE to cycle through the alarm settings. Press ALARM (upper right) button to advance the hours, tens and minutes to the desired time. When the far right of the display is alternately flashing "T1" and then "AL" you can change the chime and alarm tones by pressing the ALARM (upper right) button. The alarm is on if the middle symbol (lines) on the left of the display is shown. The hourly chime is on if the lower symbol (bell) on the left of the display is shown. When you are done, hit MODE (lower left) again to return to normal time display.

Anonymous

  • 1 Answer
  • Posted on Jan 09, 2009

SOURCE: Timex Expedition sports watch - how to view lap times?

I ran into the same problem w/ my new Timex Expedition. I emailed their help desk and they said that the Expedition models do not have lap memory feature. You need an IronMan watch to get lap recall. Wish I knew that before getting this Expedition watch...
Brian

Anonymous

  • 8 Answers
  • Posted on May 27, 2009

SOURCE: need setting instructions for date,alarm,etc on my timex expedition

http://assets.timex.com/manuals/index.html

Here is the link for all Timex watches and the appropriate manuals.
This should provide you with the information you require, if you have an issue not covered there I will try to find you more specific information.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Manual for timex TW4B02500CS

Instruction Manuals, User Guides and Downloads
timex.cahttps://www.timex.ca

Celebrating 165 Years of Innovation in Timekeeping. Discover More From Timex. Free Standard Shipping. New & Classic Styles. Styles: Metropolitan+, Waterbury, One GPS+, Weekender, Expedition, Intelligent Quartz, Originals. Shop Best Sellers.
Rating for timex.ca: 3.7 - 209 reviews
- Return policy: Most items 30+ days

Expedition North TitaniumBuilt With the Strongest Materials, Shop The Expedition North Titanium

Timex® New ArrivalsShop Our Newest Watches & Enjoy Free Shipping Worldwide.

Shop Marlin® Sub-DialA Modern-Retro Update To Our 1960s Marlin. Sharp Enough For Any Outing

Search Results

Watch Instructions & Manuals

Timex https://www.timex.ca > watch-manuals
Instruction Manuals, User Guides and Downloads. Search for documentation for your Timex by entering the name, product number or feature. Sort by name ...

Timex M EXPEDITION GRID SHOCK WATCH, ... - manualzz

manualzz https://manualzz.com > Fashion & style > Watches

View online or download PDF (301 KB) Timex M EXPEDITION GRID SHOCK WATCH, TW4B02500 Instruction manual • M EXPEDITION GRID SHOCK WATCH, TW4B02500 watches ...
0helpful
1answer

Cannot set month and day of week

If It's digital, follow this link. If Analog, pull the crown half way out to move the day and month. How to Set Timex Expedition
1helpful
1answer

How to set the date

Time and date setting
are only necessary if automatic setting by radio broadcast is unsuccessful.
To set time, date, and options:
1) With time and day showing, press and hold SET.
2) City code flashes. Press START/STOP to select city that represents your time zone. See table below
for city codes.
3) Press MODE. DST (daylight savings time) setting flashes. Press START/STOP to select AUTO (obey
setting in radio signal), ON, or OFF (disregarding setting in radio signal for ON/OFF).
4) Press MODE. Hour flashes. Press START/STOP to change hour (including AM/PM); hold button to
scan values
5) Press MODE. Minutes flash. Press START/STOP to change minutes
6) Press MODE. Seconds flash. Press START/STOP to set seconds to zero.
7) Press MODE. Year flashes. Press START/STOP to change year.
8) Press MODE. Month flashes. Press START/STOP to change month.
9) Press MODE. Day flashes. Press START/STOP to change day.
10) Press MODE. Date flashes. Press START/STOP to select M-D (month-day) or D-M (day-month) format.
11) Press MODE. Hourly chime setting flashes. Press START/STOP to select ON/OFF. When ON is
selected, watch chimes on every hour.
12) Press MODE. Button beep setting flashes. Press START/STOP to select ON/OFF. When ON is
selected, watch beeps for every button press.
13) Press SET, at any step, when done setting.
Press and hold MODE to switch between 12- and 24-hour time format.
Press SET to view date. Year is at top of display and date is below.
Press RECEIVE to view current city.
Press and hold RECEIVE to begin manual reception of time signal, as described in ATOMIC CLOCK
SYNCHRONIZATION section.

(from the User's manual)
1helpful
1answer

How do you set a timex ironman wathc and how do you use the stop watch and alarms

Hi hdirkse,

To set the digital time and date on your Timex Ironman, please follow the steps below.

1. press and hold the "set" button for two seconds.

2. Use the "advance" button to reach the correct hour.

3. Press the "mode" button, followed by the "advance" button to set the minutes on your Timex Ironman.

4. Repeat the procedure of pressing the "mode" and "advance" buttons to set the month, date, year and day of week.

5. When you are finished setting the time and date, press the "set" button to save.

Setting an Alarm

1. Begin by pressing the "mode" button until the alarm screen appears.

2. Press the "set" button and use the "advance" button to set the hour for your alarm.

3. Repeat the same procedure to set minutes and seconds for your alarm.

4. When you have finished setting the alarm, press the "set" button, followed by "advance" save and activate your alarm.

5. When you alarm sounds, you can deactivate it by pressing any button on the watch.

Hope it helps.

Thank you for using FixYa.
0helpful
1answer

Can't turn off the alarm on a timex Expedition Watch

buy a Casio wrist watch at KMart for around $17.00. They last five years, then the
band breaks and you buy a new watch. I timed the traffic signal system of our city for 20 years from a Casio wrist watch. Now in retirement, I have a Time Expedition which has several alarms which I do not need, and can't turn off. We change the time twice annually, so having alarms and chimes go off without warning ca bve a nuisance.I found some instructions on a website which shows how to turn the alarms off.
0helpful
2answers

How to set alarm on easy set alarm

You can get instructions from the Timex web site "timex.com".

At the
bottom of the screen click on "manuals/downloads", then on "product
manual download"

Enter your watch type in the search box and click on "search"
3helpful
1answer

Setting alarm on watch

You should be able to download the manual for your watch at the site below. If you cannot, contact Timex for support.

http://assets.timex.com/manuals/index.html


Jerry G.
1helpful
1answer

Old model timex compact disc digital audio

Hi catlady05,

To set the digital time and date on your Timex Ironman, please follow the steps below.

1. press and hold the "set" button for two seconds.

2. Use the "advance" button to reach the correct hour.

3. Press the "mode" button, followed by the "advance" button to set the minutes on your Timex Ironman.

4. Repeat the procedure of pressing the "mode" and "advance" buttons to set the month, date, year and day of week.

5. When you are finished setting the time and date, press the "set" button to save.

Setting an Alarm

1. Begin by pressing the "mode" button until the alarm screen appears.

2. Press the "set" button and use the "advance" button to set the hour for your alarm.

3. Repeat the same procedure to set minutes and seconds for your alarm.

4. When you have finished setting the alarm, press the "set" button, followed by "advance" save and activate your alarm.

5. When you alarm sounds, you can deactivate it by pressing any button on the watch.

Hope it helps.

Thank you for using FixYa.
Not finding what you are looking for?

161 views

Ask a Question

Usually answered in minutes!

Top Timex Watches Experts

Paul Bade

Level 3 Expert

1818 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Ngoro

Level 3 Expert

3523 Answers

Are you a Timex Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...