What is error code co650 and how can i solve it???

Manual by pass tray lift the by pass tray is the step looking thing on the right side of the copier. check to make sure there is nothing stuck inside there. IF ok then mite want a tech come out and look at it

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Electrical disconnect Draws #2 draw #3 draw #4 and Draw #5 all connections for each of those draws is in the rear middle cover. Also remove the job tray that the device where the paper comes out for faxes print etc. leave only draw one connected power off the machine turn back on after ten seconds. if the code is gone have a bad draw (s) if it comes back replace the main board if you can find one. The Di251 is legacy machine Minolta is now Konicaminolta. If the code did not come back your going to start connecting each draw back one at a time. Fig out which one(s) is causing the problem

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Only Window 95 or XP. legacy Minolta machine now KonicaMinolta. try below Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Replacing the fan will only help you with that error code c004e. The jamming will be an entirely separate issue. Where is the machine jamming? Fuser area? Cassettes? Document Feeder? Please clarify.

Can not be used with windows seven. Go to this web site at KonicaMinolta Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

to remove code "COF32" from your machine, simply change the developer with the new one. code will remove.
wish you best of luck............

Error C0045 indicates a cooling fan motor malfunction. Either the cooling fan motor or the master board needs replaced. I have a copy of the service manual on PDF if you would like to attempt the repair yourself.

C0650 code is the scanner lamp home sensor is not working so the copier does not know where the scanner is clean first will require removal of the orginal glass (large one) the other code is the image unit, has it been replaced or repaired recently. To fix mite require a new image unit

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Hi,

You could download the Drivers from ;-

http://drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/OTHER-SCANNERS/Konica-Minolta-Di2510f-10.shtml

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

thanks for posting the solution. it may help other users

Robert