Can the DCR-SR40 video camera be used as a webcam?

sony is very best company in the word

This is usually caused by a failed component in the power circuit within the camera and can be repaired fairly inexpensively. However, it’s not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I’m a professional repair technician with over 20 years in the business and have repaired many of these. I’m semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

I bought my DCR-SR40 used (just camera) and I have the same problem. Downloaded the instruction manual from sony and discovered the only way to connect to a computer is through the
Sony Camcorder Docking Station
#DCRA-C162
and a Special USB Cable!

The new laptop does not have the codecs installed . Install any software that came along with the camera. Or download latest codecs and install

unfortunately for this model, it would not be possible to be use as a webcam. it uses HDD as its recording media. it may actually work if you have:
1.an a/v capture card installed in your computer that connects to the a/v jack of the camcorder.
2.a webcam application software that supports a/v connection
basically,you would need a camcorder that that has a usb streaming feature and a computer that has an OS that supports it (i.e win xp),or you can use ilink (dv or ieee1394) connection So you should be using a digital-8 or dv camcorder.it works perfectly as a webcam.of course, your webcam software should be designed to work with whatever connection your using.hope this info helps.tnx:)

Unfortunately is not possible directly - Your cam do not support USB streaming... But You may use any cheap video capture device like Pinnacle Studio movie box or similar to connect Your camera via S-video cable because Your camera has an analog output. Only one requirement - the capture card must have an S-video input or simply RCA video input. It's easy - connect video out and audio out of Your cam to the capture device and then connect USB of capture device to Your computer.
Good luck!

In my opinion, connecting jack between camera and docking is creating problem, might be one or more pins are not connecting properly. Give a close look on both male-female jack pins.

Please remove my question, I didn't realize this was a premium site and not just good people helping with something they've learned.

Hi,
did your lcd problem solved or still need help as I'm able to provide you help in replacing lcd of camera.

Go to the site for the maker of your camera.

Look for Support.

Type in the model number of your camera.

Most manufacturers have online owners manuals.

Hope that helps.