How to remove hotel mode from a panasonic tv - TH Panasonic Televison & Video

SOURCE: Panasonic tv CT2722HE how do

May i please know the model and the make of the product in details so that it can help me resolving the issue is a more prompt manner

SOURCE: DMTECH TV IN HOTEL MODE

Did you get any solution on this problem? I have the same.... Just out of warranty :(

Please contact me on:
jonas AT teknikbolaget DOT com

Best regards,

Jonas Persson
Sweden

SOURCE: stuck in hotel mode 32 lg lcd

hold down MENU button for approx 5 seconds, then enter 1105 this will bring up the hidden menu then turn off the hotel mode.

Hope this Helps
Cheers

Little Dish Fitter

SOURCE: Akai TV - Stuck in Hotel Mode

M (menu) 7935 (regular menu appears), them press 4725 (menu service appears), then search HTLSRC (position 090), then set value 032 (this value disables Hotel Mode) - TV. Now Hotel Mode is deactivated. It is verified!

M 7935 4725, go to HTLSRC (090), fix 032 - press TV. Good luck!

SOURCE: 32lc5dc lg tv stuck in hotel mode

it is quite possible, if you bought this set from a hotel liquidation, it might still have it's lodgenet card. If it does, then it may be stuck on the channels the hotel had lined up. If there is a lodgenet card (where the cable jack is on the back) you can remove the 2 screws and just pull the card out an inch (leaving it attached to the black cable). Once that card is out, the tv should fall back to normal use. You might need to do a facotry reset to unlock TV options at that point. Only way around this would be to remove the 2 screws holding in the lodgenet card, and pulling it out of the back of the set (Don't have to pull it out all the way, just enough to disengage the data socket. Once the card is removed, you would need an actual LG remote (not the pay per view remote) and hit menu a bunch of times until it stops flashing menu on and off. Once it stops, you type in on the keypad, "98765" "ENTER". This will take you to an installer menu. Scrolling down to the highest numer there is (Should be one backwards from the "000" you start on" there is "Factory Reset" and you use the right arrow key and set it to "1" and then press enter. The TV will flicker a couple times, and then, all inputs are active.