Broken fitting for Avanti kitchen drawer front

Question edited for clarity.
Question moved from Avanti Laundry Dryers category.

It doesn't look like that one is available

https://www.google.com/search?q=Avanti+T220+manual

..

go to the hardware shop or joinery supplies shop and get shorter sides for the drawer
or go to a cabinet maker and get a new drawer made

It is far better to replace the drawer front altogether. Glues and adhesives actually make particle board swell and cause it to disintegrate so if it is splitting there is no sound way to glue it back together and retain any structural integrity. I suggest taking the drawer to a local cabinet maker and have them repair it by duplicating and replacing damaged pieces.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/dave_fb2c45146b845cea

is simle only take out the screw in front and rear from the Hood cover there are screw with screwdriver or allen hexGod bless you

Hi. Take the hose to most any neighborhood hardware store and they will fit it for you. Often, a local mom and pop hardware will be most helpful and knowledgeable. I assure you that there is a fix for your problem. J.

Look inside the bottom drawer on the frame, if not there look on the sides of the drawer or on the sides of the oven door.

If the filament is broken there is very little you can do other than fit a new filament.

By the time you have bought and paid for a new filament and fitted it, it would probably be cheaper to buy a new toaster.

Go to www.repairclinic.com. You will need the model number. You will see all the parts available for this unit. Good luck.

You need to order parts from AVANTI.
http://www.avantiproducts.com/
Very disappointing customer service.
I have been waiting 6 weeks for a new thermostat. It will not
arrive from China until June -- I was originally told it would come in April. All AVANTI parts are from China and AVANTI in Florida is the
only dealer. I will never buy AVANTI again.

You may have already found this site:

http://theavanti.com/parts.htm

But if not, it seems a good place to start.

I empathize with your plight; I have a Bertone '87 X1/9, my favorite car of all time but have been fortunate in finding a low-mileage parts car in case I need any.
I grew up in original Avanti-land; South Bend, IN.