Apple drivers install netcomm2 nb5 adsl2 modem for mac

Repost in proper section

This is automotive questions

Try the manufacturer's website

Get onlineand got to www.google.com In the google search box type: "AcerSupport" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Download and install the drivers. Look for Manuals too if you need them.
You can also try Driver Guide at:
http://www.drigerguide.com

all wireless devices must be allowed in the router by either MAC address or by name. This is accomplished by logging into to the router and setting up the device in with the wireless setup feature in your router. The router will not allow the device to connect without permissions.

there is a inbuilt drivers present in the tata photon modem ,u only need to install it from desktop icon[tata photon icon wll come]

if u still cant install it ,i can provide u manual settings

kindly rate and revert

TATA Indicom's installation was pretty easy as they provide the modem
drives for mac. But the guys from Indicom may try hard to convince you
that Plug2Surf does not work and mac and you need their dialer to
connect to the internet.

1. Download the Mac Drivers for Qualcomm CDMA MSM modem.
2. The zip file you downloaded has to be unzipped. You'll see two
files inside, one for the Newer Intel x86 Macs and other one for the
Older PowerPC Macs. Open the appropriate installation (.pkg) file.
(Note : Unplug the device before opening the file.)
3. Click Continue.
4. In the next window, "Continue" after the reading the license and
then click "Install" .
6. Now open System Preferences > Network. You'll see "Qualcomm CDMA
Technologies MSM" on the left side bar (or it pops up a window, that
it has found it). Click on it.
7. Type Telephone No #777 , Account Name and Password both internet.
8. Click on "Advanced" > Select Vendor : Generic and Modem : Dialup
Device. Click "OK"
9. Your Done! The "Connect" button should be clickable now and will
connect to the Indicom service once clicked.

Did you install the driver of that device? try to check if it installed properly

Try downloading drivers for the device. Google is youre friend :]

Try
http://www.netcomm.com.au/Support/index.php
just type NB5 driver on the search tab..

Boot camp was mainly for programs to work on the apple operating system, not for hardware to work. If you want to make it work on there you need to go on the internet to search for a driver to make it work.

I'm not up on Mac, but when any pc freezes, it is normally a driver error.