What lubricant to use on squeaky or clicking parts

Some of these folding mirror shouldnt repaired or lubricated

Thank you for your post, friend!

I see that you need assistance in repairing a squeaky door on your Frigidaire dishwasher. The best way to quiet down a squeaky door is to pinpoint the cause of the squeak. This could be an issue with your hinges, springs, or the cables. You can use a lubricant such as WD-40 on your those parts to see if that will help alleviate the squeaking. Hope this is helpful. -Matt

could be: control arms/bushings, strut seals/bearing, stabilizer arm bushings. dry rot on any rubber part, lack of lubrication of any swivel joint.

There are 2 options depending on what is causing the squeaking.

1. Powdered Graphite Lubricant - available at the hardware store. This is often only temporary but does fix some squeaks permanently and it is cheap.

2. Hi Temp Anti-Seize compound - available at the auto parts store. This is made for use in car exhaust systems so should last longer.

More than likely it is the bushings where the bar mounts to the frame. Pull these out and lubricate them with a silicone based grease and this should solve the trouble.

OK, the clutch pedal may have a stop that is adjusted too high.

Also, if you hear a squeaky sound when depressing the pedal with the engine on, the throw out bearing is lacking lubrication and is bad.

So, I hope helps you to understand what is wrong.

any oil will do this but grees stayes on longer

clean the wheels with soupy water, clean out all mud and things in between the wheels and hinges area. Check for loose parts, cracks and worn condition, repair and replace them if you can, let the wheels dry out then spray the hinges and any moving part and source of friction them with lubricant like W40.

The doc feed asm needs to be rebuilt. Only white lithium grease is used to lube the gears and avery light oil on the shafts. All parts are available from brother. I can get the parts if you have trouble obtaining them. It is relatively easy to rebuild and I charge in my area of Clearwater Florida, about 100.00 parts and labor.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de