Hand symbol - Canon PowerShot S3 IS Digital Camera

To type symbols printed in color on the right-hand side of the keys,

1. Press, then press the key of the desired symbol written in color.

To type other symbols,

1. Press , to enter the Symbol selection screen.
2. Press or to select the desired category.
3. Press or until the desired symbol is appears.
4. Press to add the symbol to the text.
   
   check this pics
   https://support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=1600eus&faqid=faqp00000856_016

Hi, I know its been over a year but if we had the same problem, it was solved by twisting the timer knob located on the bottom left hand corner. This changes the symbols in the red patch. For me, the red patch showed the number 0 and once that was changed to a hand symbol or no bell symbol, the noise stopped

it is your heart beat or your pulse. If you notice there is another number just below the blood pressure reading. that is your pulse.

It could be the Twitter hashtag meaning; "Label on Twitter to aid searching"

It is also used as an abbreviation sign or symbol meaning "pound", which is short hand for weight

It could also be used as a crude form of the abbreviation symbol for British currency; if the symbol £ is not available on the user's device.

It can be used as an abbreviation for the short hand "number" symbol...

In musical notation, it is used as a "sharp" sign, to signify a raise in the pitch of the music note by a semitone.

On the other hand, since you didn't explain the context it was used in, perhaps the sender missed a key and inadvertently pressed it.

Hey JT Tai, I appreciate your post!
The symbol at the top left hand side of your display could be child lock symbol or vent symbol. If it is the child lock you should be able to press and hold the stop/cancel button down for 3 seconds to release the child lock.

If the light is on for the vent I would seek assistance from a professional for proper diagnosis and repair to be completed on your microwave. I hope this is helpful. -Matt

I can't find the answer either.

SEE IF YOU CAN FIND IT IN THE OWNERS MANUAL

These watches only need to see a signal several times a day, not necessarily continuously.

If it keeps good time, don't worry about it.

good day,

to disable/enable the "shaky hand" symbol of your camera, just select the Picture Stabilization icon on the dial on top of the FinePix F30.

i hope this helps.

Hello Roco,
you need the Intelli Stand to activate this function. The scanner can recognize it and activates the Hands-free mode himself. Until you reoved it from the IntelliStand again.