Samsung HT-BD3252, the DVD player stays on ' Load ' and I can't play any dvd's and the blue bubble screen stays on all the time. I try resetting the unit be all attempts failed. Samsung wants me to have it serviced, does anyone know of any issues relating to motherboard issues or power supply issues that may cause this problem in this unit. thanks to all that can help me with this problem. Heloman1g

The Samsung TX card is used to send part of the audio signal from the main unit to the wireless module that controls the surround sound (rear) speakers for a Samsung Home Theater system. It isn't going to act like a ChromeCast device for your tablet.

The Samsung AH81-04177J (SWA-4000) is only compatible with a small number of Samsung Home Theater systems. see http://www.samsungparts.com/Products/Parts_and_Accessories/PID-AH81-04177J.aspx . One of the supported systems is the Samsung HT-BD3252, https://www.samsung.com/us/support/owners/product/blu-ray-home-theater-ht-bd3252-series . See the manual of the home theater system for more information: http://downloadcenter.samsung.com/content/UM/201104/20110419185210639/HT-BD3252A_XAA_0807[1].pdf .

I hope this helps.

Cindy Wells

The Laser Pickup Assembly is defective, to play blue ray it needs higher precision and velocity to produce the higher resolution, it is not cost effective for repair.

We have finally managed to get avatar to play!!!!! We had the same problem. Frustrating I know - but after returning the DVD back to the shop three times, trying updating previously, then waiting for another update from Samsung from Sept (they have not provided a further update) - we are feeling jubilant!

We copied the firmware to a CD disc once again. It did not initally look as if it was loading but if you wait you are asked if you if you want to upgrade eventually. Once you affirm - it takes a good five to ten minutes to process the firmware/ upgrade. It tells you when it has completed. We discovered by chance that you need to then switch off the player and switch back on again for the update to become functional.

Initally we still could not get AVATAR to load as far as the menu screen. We tried newer Blue Ray DVDs purchased December that previously would not play - and now do! To get AVATAR to play we switched off & on the blue ray player with the disc still loaded a couple of times and each time we got a little further towards the functioning menu screen.

A lot of messing around, so be sure you have the time available to persevere!

try disabling "CE Link" communication between the TV and Blu Ray player. see this link
http://forums.cnet.com/5208-13973_102-0.html?threadID=347242

is it a burned disk? if so your dvd player might not be able to play that type of dvd... i know sometimes also scratched ones won't play at all as well... of course also make sure everything is plugged in correctly and if it does this with more different dvds then there's something wrong with the player itself... which i hope is not the case as those are very difficult to fix yourself

looks like you need a new player, but first try anothere t.v if it does the same then you need a new player

My initial IDM-1731 tells me no disc every time i try to play dvd cd please help me

Sorry, no suggestion other than don't buy Samsung. That's my conclusion after owning the same model. It worked fine for a while, but now won't load any DVD... usually. Sometimes it will play one, but more often it won't. Mine tries to load ("Loading") for a long time, I hear the DVD spinning, then ultimately the screen displays "This disc cannot be played" or something to that effect.

Try playing Different DVDs, Second Make sure which Region Disk your playing is it Region 1 or Region 2, If your DVD player is Manufactured in USA it plays only Region 1, If its manufactured in UK it plays only Region 2, If still you face same problem Use Lens Cleaner, If still you face same problem do Reset.
To Reset Dvd player, Remove DVD from Dvd Player, Unplug Power chord from Walloulet for 15minutes so player goes to Defult Factor Settings, Then plug back again Power chord. Turn on Dvd player insert DVD, It should Play or else Claim Warranty.

clean the lens of your dvd if that does not work there is a strip connected to the lens have that replace or adjusted by a tech.good luck.