Manual for Tappan Wall oven

Nothing exists online for that. You remove it from the cabinet and measure the gap width and height. Then put the rule in to the back and measure to the edge lip. Take 6" off that measurement for an air gap.

https://www.google.com/search?q=Tappan+Double+Wall+Oven+11-2969-10-01+dimensions

..

Don't know about your gas oven, but we have a Tappan wall oven (electric) that we want to get rid of. Maybe you could get the door hinges and spring from it? We are in East Tennessee.

Hello Owner, thank you for your inquiry!
I understand that you need the use and care manual for your Tappan wall oven, 12-4990-00-04. If the model is older than ten years old manufacturers will not keep that information available. You might be able to perform a search for antique models online for any additional information. -Matt

try RepairClinic.com they may have the parts and delivery has been good for me.

Hey friend, I appreciate your post!
I understand that seal on your Tappan wall oven has come off. In order to provide you additional information regarding the seal I would need your model number and serial number. You can locate the serial tag (which has your model number listed) on the front of the oven on the left side. With that information I could provide you additional assistance. I look forward to your response. -Matt

It's going to be hard to look up the old model numbers, but there is a number on the old thermostat that might help.I may possibly have one but have no way to look up the specific model.

Hi, With the model #, I could get you the info on the part# and how to change them springs and maybe=y hinges.
Please let me know

Thanks
Vic

These are the F2/F3 error codes for a Tappan oven
F2 Oven too hot Check Bake function, if OK, replace oven temperature sensor F3 Oven temperature sensor open Check oven temperature sensor, should be ~1100 ohms at room temperature. If too high or low, replace oven temperature sensor
please take the time to give this solution a fix ya rating.

clarkco

yes, the problem is fixed thanks to repairclinic.com. those guys are awesome and there is no fee for their help. the repair parts are cheaper than anywhere else i've checked and the tech support is second to none.

I tried randomly pushing 2 buttons at a time, and when I pushed "Timer Off/On" and "Cancel" together it unlocked and is now working fine. The following day it beeped a lot for an hour or so (must have been catching up on previous pushes) but now is back to normal.