Cook top flashing code f152

Take out the right front burner and use your multimeter to check it for continuity. Only then can you be sure that the error code isn't lying to you.

It is my guess, that with an error message so specific, that if no burners are working, it is not the front right burner at all. Hands on testing is the only way to be sure.

F152 means the right front burner has failed, the sensor in it is bad, the burner will need to be replaced.

error code F152 ' Appliance Video

The element is $225.00 so it is not something to change on a guess. Full testing procedure here, or call for a Service Engineer.

https://www.appliancepartspros.com/answers-for-ge-element-radiant-lt-wb30t10080-ap3188020-question-148609.html


..

JENN AIR
'Newer Style' Range/Stove/Oven Fault Codes
Fault : F9
Condition: Door lock safety circuit on power relay board sensed
Replace power relay board
JENN AIR
Range/Stove/Oven Fault Codes
Fault:F9
Condition: Door latch supervisory
Check door lock circuit or replace clock assembly or ERC

Try Dacor's web site

always unplug electricity before attempting to repair on any electrical appliance

That will not matter

Hello - Typically error code E on Electrolux induction cook top indicates an error with the user interface board/control board. Contact a professional to move forward accurately and properly diagnose/repair the unit.

Hi Darren,
Whats the model of your cook top?Here's the manual for a few Baumatic cook top models.

Hope this helps.Thanks!
Please rate this answer.

Hi

The replacement parts for GE cook top are available on the link. Hope this helps...please post back for further assistance.

Daniel

F152 means the right front burner has failed, the sensor in it is bad, the burner will need to be replaced. If you go to the following web page, and pick out your exact model number, you will see diagrams and parts lists that will help you get this fixed. You can order the element from that website, if you choose: http://www.appliancepartspros.com/partsearch/modelsearch.aspx?model=JP969 Good luck, and hope this helps.

Hello. Work directly with Jenn Air on this. Go to this link which includes a toll free number and a link to IM with their technician, for free.

http://www.jennair.com/flash.cmd?/#/page/customerservice/

Recommend you look up code in owner's manual. Since you did not provide make or model, there is too little to go on here...