Question about Frigidaire AEQ7000ES Dryer

2 Answers

Frigidaire Affinity Front Loading Electric Dryer. In about 5 minutes of starting the dryer, an error "Ad" shows in the window above the start button. Then the dryer stops and the lights under the "Ad"

How do I fix this?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 979 Answers

I believe that code means auto dry. Lets make sure the lint and dust is clear from the machine. Check all of your wiring out well since is generally a cause. You may ave to replace the thermistor. Have you gotten any other code along with this.

Posted on Mar 04, 2013

Testimonial: "Thank you Bill Dickerson, I have found my manual now for error codes and how to read them and am now getting E56 on digital display read out. But not showing that error code on the manual???"

  • blondio123ru
    blondio123ru Mar 08, 2013

    Error 56 E56 in display but my manual does not give an error 56 code anywhere??

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Are you serious? I just got this dryer. Its brand new

Posted on Jan 09, 2014

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Liza Timmers

  • 1 Answer

SOURCE: iDry Frigidaire Affinity Gas Dryer Error "AD" shuts off in 5 min

Great. This is the same error my electric dryer is showing now...

Posted on Oct 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the start button on a frigidaire affinity dryer aeq7000ego?


There will be screws along back at the top holding the top panel. Using the appropriate screw head screw driver you will have to get these screws out, lift the top panel slightly and push out towards the front. This should disengage the panel from the notch on the main body and come out. That will get you access to the console.
For an assembly view refer to parts manual you can download from this site
Frigidaire AEQ7000EG Parts Catalog

Aug 16, 2014 | Frigidaire AEQ7000EG Affinity Series...

1 Answer

How to get the error code test on Frigidaire affinity model FARE1011MW


Good Afternoon Friend,

I understand you are receiving an error code on your Frigidaire dryer, model# FARE1011MW. I see that when you press the start button, your dryer beeps and the drying light begins flashing. I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Sometimes there can be a miscommunication between the different boards inside your appliance. Restore power and start any cycle. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Jun 28, 2014 | Frigidaire Dryers

1 Answer

My frigidair affinity dryer wont start it just beeps


Good Afternoon Friend,

I understand that your Frigidaire Affinity dryer, model# FASE7073NW, will not start and just beeps. I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power and start any cycle. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your dryer status has changed successfully. Hope this is helpful.

-Best regards-
WP

Jun 01, 2014 | Frigidaire Affinity FASE7073NW 27"...

1 Answer

Frigidair affinity dryer error code Ad


AD is not actually an error code, but is typically considered an Air Dry setting or feature on the unit.

Aug 06, 2012 | Frigidaire Affinity 5.8 Cu. Ft. Electric...

1 Answer

I have an Affinity Dryer that works for the first 5 minutes, exactly, then in flashes AD. It continues to spin but not dry at that point.


Problem is going to be with the thermistor located on the blower housing at the front. You will see 2 plastic pieces with wires going to them. The thermistor is the one on the left. Cannot jump this out all you can do is change it.

Mar 10, 2010 | Frigidaire Affinity 5.8 Cu. Ft. Electric...

1 Answer

IDry Frigidaire Affinity Gas Dryer Error "AD" shuts off in 5 min


Great. This is the same error my electric dryer is showing now...

Jun 27, 2009 | Frigidaire Electric Dryer

16 Answers

Frigidaire Affinity dryer error code?


HELLO,
I HAVE A FRIGIDAIRE AFFINITY DRYER (AEQ6000CE32). WHENEVER I PUT THE CLOTHES IN IT JUST SPINS FOR 10 TO 15 MINUTES AND SHUTS OFF BEFORE THE ALLOTTED TIME. THERE IS NO HEAT IN THE DRYER. ANY SLOUTIONS?

Sep 16, 2007 | Frigidaire Affinity ATF7000ES Front Load...

Not finding what you are looking for?
Dryers Logo

864 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Donni Steen

Level 3 Expert

687 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...