I just bought a new Singer 8763 a couple days ago. I tried out a few "test" stitches on scrap fabric to get the feel of the machine. I started to sew on my project and the fabric got jammed into feed dog. I removed the fabric and the tangled thread easily. After that, my machine stopped working right. I push the pedal and it runs, but the needle won't move. It acts as if the bobbin winder is engaged and it is not. I've tried rethreading the needle and bobbin, removed the plate and cleaned that out (nothing there)...I'm at a lose. I just bought this and I'd really love to use it!
SOURCE: Machine will not pick up the bobbin thread.
if your machine's needle threads from front to back, make sure that the flat part of the needle shank points to the rear of the machine. If it threads from left to right, the flat side should face right, etc.
SOURCE: NEEDLE WON'T PICK UP BOBBIN THREAD
im not!
it needs a good service the timeing has sliped out a little, nothing more that that,,,see its not a lost cause just yet
Testimonial: "Thanks! I was hoping to avoid paying for a fix, but it looks like I have to **** it up. So much for being thrifty and restyling my clothes."
277 views
Usually answered in minutes!
×