Demo mode/? My Globe is in Demonstration mode. How do I fix this????

SELECTED PRODUCT: (change your search)
How to disable the demonstration (DEMO) mode.
Article ID: 42707 ' Last Updated: 03/11/2014
Sony® stereo systems will enter the DEMO mode the first time you power on the system or if you do not operate the unit shortly after turning on the power to the system.
To disable the DEMO mode, while the stereo system is powered off, press the DISPLAY button repeatedly until the demonstration display disappears.
NOTES:

• Depending on your model, some units have a DEMO button that is used to disable the demonstration mode. If your unit has this button, with the power to the system off, press the DEMO button until the display disappears.
• If applicable to your unit, setting the clock on your stereo system will also disable the DEMO mode.
• Using the buttons on a supplied remote control will not disable the demonstration mode.

If model-specific information is needed to complete any of these steps, refer to the operating instructions supplied with the product. Manuals, Specifications and Warranty information for your Sony product is available online.

DEMONSTRATION MODE – PROGRAMMABLE CONTROLLER MODELS
For display purposes, the appliance has a demonstration mode to enable demonstration of oven functionality without consuming power. In demonstration mode, the display, the light and the fan only are operational.
When the appliance is in demonstration mode and the display is switched on, the clock symbol will be on.
If the appliance is in demonstration mode, to operate the appliance normally the demonstration mode will need to be deactivated.
To deactivate demonstration mode:
1. Ensure the oven is off by pressing the ON/OFF button. 2. Press and hold the ON/OFF button until the display turns
ON then OFF and a single ‘beep’ is heard. Immediately after press and hold the ‘Timer’ and ‘–’ buttons simultaneously, until a triple beep sounds to confirm
the operation.

Demonstration Mode
This is to enable you to experiment setting various
programs. (The letter D will always appear in the display
window. This is to confirm that there is no microwave
power produced and it is safe to use the oven without
any food). To set Demonstration Mode: press micro
power once, then press Stop/Cancel 4 times. To cancel
Demonstration Mode press Micro power once, then
press Stop/Cancel 4 times.

Turning DEMO off
A demonstration of the display is shown if you have not set the clock.
You can reduce the power consumed in standby mode by turning the demonstration off.
While the unit is on:
Press and hold [-DEMO] until "NO DEMO" is
displayed.
Each time you press and hold the button:
NO DEMO (off)9DEMO (on)

The 'Demo' button is on the left hand side of the front panel.

The words "Demo Stop/Clear" are right there on the left-hand control knob.

http://www.p4c.philips.com/files/f/fw-c788_19/fw-c788_19_dfu_eng.pdf

Page 13...

To activate the demonstration

In Standby mode, press and hold DEMO

STOPçon the system until "DEMO ON" is

displayed.

?žœ The demonstration will begin.

To deactivate the demonstration

Press and hold DEMO STOP çon the system

until "DEMO OFF" is displayed.

?žœ The system will switch to Standby mode.

Note:

- Even if you remove the AC power cord and

reconnect it to the wall socket, the demonstration
will remain off until you activate it again.

The demonstration will activate the first time you turn on
the power. When the demonstration starts, the following
message appears in the display:

“NOW DEMONSTRATION MODE IF YOU FINISH DEMONSTRATION PLEASE PRESS POWER KEY WHILE THIS MESSAGE APPEARS IN THE DISPLAY THANK YOU”

To cancel the demonstration
Press the Power 1/0 button to turn the receiver off while the above message is being displayed. The next time you turn the receiver on, the demonstration will not appear.


It's in the manual - page 3.

CLICK HERE for your owners manual in PDF format.

Cancelling the DEMO MODE is explained on page 29... as follows....

Select the Demonstration mode
Push the Control knob to [FM] or [AM].
Select the "DEMO" display.


Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time the knob is pressed at least 2 seconds,
the Demonstration mode switches "on" or "off"


Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

CLICK HERE for a PDF version of your manual.

To turn OFF DEMO mode - go to page 50 of the manual.... and find the following-

1 Select the Demonstration mode
Push the Control knob to [FM] or [AM].
Select the "DEMO Mode" display.

2 Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time the knob is pressed at least 2 seconds,
the Demonstration mode switches as shown
below.

Demo Mode "ON"
Demo Mode "OFF"

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Me, too! Help!!

To stop the demonstration mode
• Press and hold stop (on the system
only) for five seconds when the
system is in demonstration mode.
ª The demonstration will stop.
ª "DEMO OFF" is displayed.
ª The system will switch to standby
mode.