Programming Insignia Digital Box to Phillips Universal Remote

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote

..

0038,0031,0033. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier.
http://electrohelponline.blogspot.com/ Check this link too. http://remotesearch.blogspot.com/

These are the codes to check. 0817 0821 0848 1910. If you wish to get more codes, check this link.

Check this code. 0436

The digital to analog converters did not exist when the TV was built and the remote programmed. Thus you will have more luck programming the converter box's remote to control the TV. (At least with my converter box, the included remote could only turn on and off the TV. It would only change channels on the converter.)

Most universal remotes only have codes for devices released 6 months or more before the TV was programmed. So a new universal remote will probably control both the TV and the converter box. (Program the converter box using a code for LG or Zenith set top boxes if Insignia isn't listed. LG makes Insignia video products for Best Buy.) The remotes that are programmable by a USB connection to a computer are the fastest to set up.

A replacement remote for your TV is available here: http://www.mcmelectronics.com/partfinder.aspx?brand=&mdl=NS-LCD27&mode=part . An exact replacement remote for the converter box can be purchased at: http://www.remotes.com/remotes/servlet/rs?a=gmi&uuid=13055197980390&smodel=NSDXA1&brand_pn=INSIGNIA_NSDXA1 . The manual for the converter box (as a PDF) is here: http://cbsdallas.files.wordpress.com/2011/01/insignia-ns-dxa1-manual.pdf .

I hope this helps.

Cindy Wells

doublecheck the paperwork for both the converter box and the universal remote. the universal may be too old to be used with your converter. look in the back of the universal's manual to see if your box's corporation has a code you can set.

If you have a GE universal remote try code 0656

Rca web site for your coses
http://66.77.167.109/rcaaccessories/RcaaccessoriesController.do?ACTION_TYPE_ID=ACTION_TYPE_CATEGORY&ACTION_CATEGORY_ID=STR_CATEGORY_REMOTE_FINDER

Since Insignia is really Zenith, a universal remote that can work on Zeniths should do the job. I have this converter box and use a RCA universal remote. I code that works is usually reserved for Zenith satellite boxes (5203).

The code for a Magnavox Converter *Analog to Digital* to a Philips Universal Remote is 0759