How do I enable the numbers section on my Acer SK-96225 keyboard?

did you try plugging it into a different USB port?

I’m happy to help further over the phone at https://www.6ya.com/expert/arturo_82cd53a2264b6f81

You may have enabled the NumLk (number lock) which changes the right hand keyboard to a number keypad.
The NumLk LED will light up when this is enabled. To switch off the NumLk press the NumLk/ScrLk key near the F11 And F12 function key.

have you tried pressing the num lock key just above the numbers?

Look closely at the keys on your keyboard.
There's one key that enables/disables "NUMBER PAD" mode.
Press that key.

Hi,

Please try to visit below link

ACER KEYBOARD

I need ibm keyboard driver,model no sk-8815,where i can download free

Hi,
Please install the driver of your multimedia keyboard other than that the special function keys will not work.

Make sure that all USB functionality is enabled in the BIOS, especially USB Legacy Mode. If Windows still does not recognize the keyboard, then it is not compatible with USB. USB keyboards can be found as low as $10 pretty easily if all you need is basic keyboard functions.

(That is the the Num Lock indicator, nothing to worry about.) If it is not working it is likely because USB keyboards can time some time to be recognized by windows, let the computer boot up with the keyboard connected and let sit for up to ten minutes.

Sometimes if other hardware is detected at the same time which requires drivers to be installed, windows will never proceed to installing your keyboard, however you cannot install the other drivers until you have a working keyboard. To solve this, you will need to use an older style PS/2 keyboard to get everything installed and working as they do not need to be detected.

Hit SCROLL LOCK