I have 2 Routers a DLink DSL-502T and a DLink DI-524 Wireless router, I can connect to the internet on my desk top using the 502T fine but I can only connect to the internet on my laptop using the cable, I want to connect wirelessly, It says theres a strong signal but when I unplug the cable it wont connect to the internet even though it says its connected... Im stumpped HELP!!!
Try to reconfigure your wireless network on your DI-524.
To access the configuration page of your router by Default type in on the address bar 192.168.0.1. On the login page by default the Username is admin and leave the Password blank.
If inside the the configuration page of the router
>Click Home
> Click on WIRELESS located on the left side and you will have the wireless setting of your network
> Change the wireless network name
> Under security choose either WEP or WPA -PSK for this type of router.
> Type in your new network key (also know as Passphrase of Key1).
For WEP use 0 to 9 Number or A to F character and it should be exactly 10 characters.
For WPA-PSK you can use alpha numeric from 0 to 9 and from A to Z. The minimun character would be 8.
> Click on apply
> Click on continue.
Try accessing your wireless network first using your wireless computer. If you are connected to your wireless network try connecting to the Internet.
258 views
Usually answered in minutes!
is there any sort of protection used like WEP etc on your wifi...
check the wifi settings carefull....
×