Loading film into the vivitar camera binouclurs

The film loading instructions begin on page 2 of the manual. If you need a manual,you can download a scan at
http://gdlp01.c-wss.com/gds/5/0300003855/04/PSSX130IS_CUG_EN_03.pdf

Lift the rewind knob upwards to release the film chamber door.

Pull up on the rewind knob to open the back door. put the film canister in, lower the rewind knob and pull enough film leader to attach the film to the takeup spool. close the back cover and advance to counter #1

Most probably find a Vivitar Vivicam PZ8000 manual here. Just send them a search request. Service is not free, but often worthy.

jackson rook,

the speed of the film may be to high if your camera has dx coding contacts in the film chamber. otherwise---- film in camera or not it has no effect on meter operation. move the advance lever to the right slightly and push down on the shutter release button slightly to turn meter on.

Took out the battery, then put it back in. The film then loaded properly.

I need a copy of the instuction manual fo the Vivitar Vivi Cam 35 Digital Camea

be sure that nothing film inside the camera , open back side of camera by pulling spinning knob , put film spool on left side and at the right side insert the film strip on diagonal small hook, turn the spool rachet turning left side then click shutter twice while holding the spinning spool left side , then close the cover , tightened the spinning spool little bit then test shoot.

OK, U will see the hole that have arrow. Pull up and then open the inside film. Put ur film and close. Then push down the arrow. Then u can takin picture.

Pull up on the REWIND knob.