Electrolux oven error code f 136...what to do?

1. Turn off the oven.
2. Press and hold the "Bake" and "Broil" buttons.
3. Turn the oven on by pressing the "On/Off" button.
4. Continue holding the "Bake" and "Broil" buttons until the display shows "PF" or "8.88."
5. Release both buttons.

If these steps don't work, refer to the user manual or contact Electrolux customer support for further assistance.

Google Electrolux oven f08 error code.

It is good practice to specify model of appliance
(like EOG9330XN).

Probably means temperature range of oven sensor exceeded
(for more than 5 seconds).

Dado

Hello Nancy Keller - Typically, error code F11 indicates a shorted keypad. Try resetting the wall oven by unplugging it or flipping the household circuit breaker off. This usually clears most false error codes. Wait approximately ten minutes and if the error code does not clear, I would recommend contacting a professional to proceed further. Most likely the EOC on the range will need replacing.

I am getting the same error right now for the microwave part of the microwave oven combo. The oven is working fine with no racks out of place.

My error code is F08

Hello,
That model number does not seem correct but error code F10 on the Electrolux ovens relates to a faulty power board.If that Serial is correct then it is still covered in the 12 months full warranty.

Hope that helps.

Hello,

I hope you mean error code F3. if so then that means a software error and if you disconnect from mains supply then reconnect this should reset the fault if that does not work you may have a damaged circuit board.

Hope I helped.

Same F23. Resetting the beaker seems to fixed it. Thanks to all