File P4P800SE.ROM not found

the file you search for is a bios fil.Go there-
http://support.asus.com/download/download.aspx?SLanguage=en-us
Select - Motherboard
Select - Socket 478
Select - p4p 800se
Select operating system(xp,2000....)
Than download the bios....ectract it.
you got the rom fil

Hi,

Please download these drivers from

http://support.asus.com/download/download.aspx?model=P4P800%20SE&SLanguage=en-us

Regards

Ashly

I don't know what 'Sound' unc path you are referring to, but if you want to find the UNC path to a networked share, it is \\computername\sharename
So if your computer is named say Johndoe and you have already mapped a drive to the folder you are wanting to access called itunes share then your UNC path is going to be \\Johndoe\itunes share
Good Luck!

when your computer it should say f1 to stup if you go into to the setup menu and scroll around untill you find bios and if you are going to use it dont turn it off if you are not going to use the bios it will help your computer if you turn that off rate me thanx

Hi turn off an unplug the PC open the right side cover of the computer, remove the memory card and clean the contact cotton w/alcohol and wipe it dry and re install it back. This might solve the problem.

HH

Hi there
have a look here to find out which intel processors the board supports.

http://www.cpu-upgrade.com/mb-ASUS/P4P800_SE.html


Thanks for using Fixya!!!

You need to go to the website of whoever made the motherboard and get the BIOS flash utility and the BIOS binary file to update your BIOS. Make sure you get the right one, as using the wrong one can render your motherboard worthless. The BIOS file has to be the exact match. There is no such thing as close in this situation.
If you are not sure of the exact make and model, get te free Belarc Advisor from http://www.belarc.com
The BIOS chip holds information about your motherboard hardware. It is reprogrammable. It uses what is known electrically erasable read only memory. This is also called Flash memory. Reprogramming is called flashing. When you flash the BIOS, all data is erased, then the new data is written. The flash utility will most likely allow you to save the old contents, but you might have an extremely tough time recovering from an improper flash. You'll also probably need a couple of floppy disks, one of which may have to be bootable. If you need a bootable floppy disk, you can get an image file from http://www.bootdisk.com.

okay
when upower up the compter pressF8 key then enter in safe mode.
then logon wndoes then type in run "chkdsk /r"
then press "y"
then restart the computer.then it recovers error on harddisk.

The OS is hidden in memory, you can clear all files off the machine and it will still work.

The only requirements are the 4 folders:
Firmware
Movies
Music
Pictures

That's it!

New firmware can be found at www.lacie.com

BOOT BLOCK COMPATIBLE VERSION VER .005
BAD BIOS CHECKSUM

CHECKING FOR CD ROM
READING FILE "P5SD2VM.ROM"
READING FILE "P5SD2VM.ROM"
READING FILE "P5SD2VM.ROM"
READING FILE "P5SD2VM.ROM"
READING FILE "P5SD2VM.ROM"
NO CD-ROM FOUND
CHECKING FOR FLOPPY DISK
READING FILE "P5SD2VM.ROM"
READING FILE "P5SD2VM.ROM"
READING FILE "P5SD2VM.ROM"
READING FILE "P5SD2VM.ROM"
READING FILE "P5SD2VM.ROM"
NO FLOPPY DISK FOUND

Does someone already fix this problem??????