Voice mail light

It varies by carrier, but most services walk you through options when you call voicemail. You want the personal options and greetings selections to change the message.

If there are new voicemail messages, likely you will hear "stutter tone" followed by dial tone when you raise or use the handset. If you don't hear stutter tone, then likely messages in your provider voice mail service have been marked read and therefor no new voicemail indicator.

If you cleared voice mail indication on your RS 43-325 phone, voicemail indicators will remain off until the next new voice mail message is recieved.

See page 13 of manual for further information.
https://manualzz.com/doc/937306/radio-shack-43-325-user-s-guide

You apparently have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Yes, the was bothering me for some time. I think the indicator is a little green light that blinks in the extreme upper left hand portion of the phone...not on screen, above it....but the blinking light may indicate a missed call or a voice mail is present.

Try this. Go into your phone icon, press and hold '1' and listen to any open messages. Delete each. Next go into your Call Log and delete all call history. Now exit.There should be no green light flashing in the upper left hand corner of phone. You have just cleared everything.

Next call your phone but hang up before leaving a message. Note the blinking green light in the upper left hand corner apparently indicating you missed a call. Go into your Call Log. It will say one missed call. Exit the call log and note that the blinking light is now off. You have acknowleged the call in the call log so the light goes off when you exit.

Call the phone again. This time leave a message. Note the blinking light again. Go into your call log again. Note the missed call. It would be nice if there was an icon or something HERE that indicates if this call left a voice message....but there does not appear to be. Exit again. This time note that the light continues to blink even though you entered the call log and acknowleged the call. I believe it continues to blink because you have a voice message. Exit.

Go into the call log again. Delete the missed call from the call hsitory. Exit. The light still blinks, I believe still indicating a voice message.

Go to your phone icone. Press '1' to check messages, delete the message and exit. The blinking is now gone.

So it appears a blinking green light indicates a missed call. If it still blinks after exiting the call log, you have a voice message.

If someone figures something else out let me know because this stinks!

You received a message on the voicemail system provided by your telephone company. To hear the message, dial the voicemail number provided by your service provider (in many cases, this will be your own phone number), and follow the voice instructions for listening to your messages. You need to store the voicemail access # by pressing [MENU], [#] [3],[3],[1] on the handset. To access the voicemail, press [TALK], then softkey [VM]. Depending on your service provider, you may need to clear your voice mailbox to remove the notification.

That is the message waiting indicator, it is telling you that your Call Notes (Or whatever your service provider calls it's voicemail) has a message waiting. If you do not have a message waiting, you can turn the light of by following these steps:

Resetting the voice message waiting indicator
When you receive a new voice mail message, the new message LED on the top of the handset flashes and
appears in the handset display. In the event your message waiting light gets out of sync with your phone company’s
voice messaging system, you can manually reset it back to the “No messages waiting” state.
Press and hold FIND on the base for five seconds.
Note: The handsets connected to the base will start to beep, however, keep pressing for five seconds.
A beep sounds and the message alert tone is reset.

Partner System doesnt have light notification feature if voicemail left on carrier site. I suggest you purchase small voicemail (4 mailboxes) for about $250 with installation and cancell your carrier voicemail service. You will be able to see new message light, also you can access your mailboxes remotely. It will pay for itself if carrier services cancelled within 7 or 8 month. If interested contact me vkagan at aaa-avad dot com. We are located in NY.

i still have flashing red light and the message now reads phillips
new message

how do i get this message
what number do i use to set up voice mail since i do not subscribe to voice mail? When i activate voice mail i get the operator

i still have faith that we can solve this problem

peace

robert barnes

What worked for me was to call my phone from another phone and leave myself a voicemail. I then went in and retrieved and deleted that voicemail. Once I hung up from my voicemail service my handsets reset about 10 seconds later.

I hope this helps!

Subscriber is T-Mobile@Home. First, cleared all messages from T-Mobile voicemail.

Now to fix your GE phone:


Push the program key. Select Handset Setup Push the program key Select Default Settings Push the program key Select 1 Yes. Push the program key
Hope this helps.