Need to install oven to wall

You want to take the microwave off the wall, is that correct. 1st unplug the microwave--plug should be in the cabinet over the microwave. Next--in the same cabinet you should see 2 or 3 phillips head screws with big heads going through the bottom of the cabinet into the microwave top. Have someone hold up on the microwave while you remove the screws. They are about 3 inches long. Once the screws are out, the microwave should tilt forward and downward at the front. The back of the MW sits on 4 tabs on the wall mount plate so to get it off completely you have to lift the back up slightly off the tabs about 1 inch. Feed the power cord down through the cabinet and you are done.

Remove a GE Spacemaker
The GE Spacemaker series of microwave ovens are designed to be installed above an oven range, freeing up counter space in your kitchen. Some of these Spacemaker models are connected to an outside venting system to carry kitchen vapor and odors outside. Other Spacemaker models utilize a ductless system to do this. Removing a GE Spacemaker microwave oven isn't a difficult task, but, because of the size of some of the oven models, it is a two-man operation. Have a question? Get an answer from an appliance repair specialist now!

Other People Are Reading

• How to Remove a GE Over the Range Microwave
• How to Uninstall a GE Spacemaker Microwave

Things You'll Need

• Assistant
• Sharp knife

• Phillips screwdriver

Instructions

1. • 1 Open the cabinet above where the Spacemaker microwave oven is installed. If you see a vent in the cabinet leading to the Spacemaker oven below, your Spacemaker is vented. This vent needs to be disconnected before continuing with removal. Disconnect the vent either by loosening the duct clamps or by cutting the duct tape away with a sharp knife. Pull the vent out of the top of the oven.
     
   • 2 Have an assistant support the oven from below. Loosen the mounting screws connected to the Spacemaker through the cabinet bottom. Loosen the screws by turning counterclockwise with the Phillips screwdriver.
     
   • 3 Unplug the Spacemaker from the socket in the cabinet.
     
   • 4 Continue loosening the screws while your assistant holds the oven in place. Once the screws are removed, have your assistant slowly lower the Spacemaker down by lowering the front face at a 45-degree angle.
     
   • 5 Feed the power cable for the Spacemaker through the hole in the bottom in the supporting cabinet.
     
   • 6 Help your assistant slowly pull the Spacemaker forward and out of the mounting brackets on the rear wall. Once the Spacemaker is cleared of the mounting cabinet and rear wall, set it down.
     
   • 7 Remove the mounting bracket from the rear wall by loosening the screws.
     

Read more : http://www.ehow.com/how_7344250_remove-ge-spacemaker.html

For dimensions look at the GE Appliance web site at: http://www.geappliances.com/ then search for JVM1653WH01
This will take you to the product information page for the JVM1653WH 1.6 Cubic Foot Over the Range Microwave Oven with weights and dimensions, installation instructions etc.

You can also download GE owner's manuals and installation instructions here.

You can find handy exploded views and order parts by model number here.

If you need simple do it yourself repair tips or a free estimate, let us know.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

have you check the fuses, maybe its open, orthe hv diode.

check fuse inside unit microwave has a fuse around 15 to 25 amps get at local hard ware store u should discharge capacitor before installing fuse not nessary in microwave

You can download GE owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Hello ,

My husdand broke our plate. Did you find one yet at a resonable price? If so email me at [email protected] and let me know how much you paid for it.If not you can call GE at 1-866-540-2797 and they will transfer you to the parts department and then you can order a new one. I just called ther but the parts department was closed. So call there M-F 8am-9pm.Good luck!

You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

You'll need to remove the oven from the wall.

This is safer with two people and the installation instructions will be of great help.

You can download GE owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Here a few site can help you:
http://www.partselect.com/
http://www.repairclinic.com/

I’m happy to help further over the phone at https://www.6ya.com/expert/vitaliy_f406165329c75ede