My Acer Aspire 4310 wireless connection is not installed properly. My networks adapter under device manager was in exaclamation yellow signed. my Network adapter listed :
1394 Net Adapter
Broadcom 802.11g Network Adapter -With Exclamation yellow point.
Broadcom Netlink (TM) Gigabit Ethernet
how can i fixed these problem..please help.
Follow this link to download your driver ---
http://www.acerpanam.com/synapse/forms/portal20.cfm?recordid=4486&formid=3394&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2
download and install
if you still have problems let me know.
if it works please mark this thread as fixed :)
how are you connected to the internet now?
ok so you downloaded the driver already.
lets do this ---
go to devive manager and double-click on the Network adapter that has the Exclamation point--
in the new box, click Driver and click uninstall, just to make sure it's disconnected.
exit device manager
go to this link to download CCleaner
http://www.filehippo.com/download_cclean...
Download, Install and run it
**
Click on the TOOLS tab on the left side. Scroll to the Broadcom wireless 802.11g network adapter software and click on it (DO NOT REMOVE LAN software)
Click on the Run Installer to uninstall the software
**
Click on the REGISTRY tab on the left side
click on Scan For Issues
click on Fix Selected Issues
If it asks you to make a backup click yes and save
**
Click on the CLEANER button on the left side
click on Analyze
click on Run Cleaner
Close CCleaner
Restart your computer
when it boots up try to install the file you downloaded.
let me know what happened ---
×
756 views
Usually answered in minutes!
Hi,
im trying to download this link
http://www.acerpanam.com/synapse/forms/p...
but the problem is still there..Cannot Start this hardware. there was a problem installing this hardware.
Windows cannot load the device driver for this hardware. the driver may be corrupted or missing (code39)
Im using a LAN cable connection..my connection is very well.
Hi,
After i followed your instruction, the problem is still there, Cannot Start this hardware, there was a problem installing this adapter "Broadcom 802.11g Network Adpater".
windows cannot load the device driver for this hardware.
the driver may be corrupted or missing.(code39)
Please help me to find some other solutions. thanks.
Hi,
After i followed your link, the problem is still there. "cannot start this hardware" message. my broadcom 802.11g Network adapter is still have an exclamation point under device manager. Please help me to find another solution. thanks a lot
×