I have a creative zen when i plug it into the computer, the computer wont reconise it and the zen reads clean up

You can download the drivers from the creative website at this location.
http://support.creative.com/Products/ProductDetails.aspx?catID=948&subCatID=958&prodID=15306&prodName=ZEN%20V%20Plus&subCatName=MP3%20Players&CatName=Entertainment+Devices+/+MP3+Players&VARSET=prodfaq:PRODFAQ_15306,VARSET=CategoryID:948

First of all right click on that drive and go properties and check the space available - if its 2gb then :-( but if you find the same space like utilized and free space then try the same device in different computer and possible with different OS like xp-3 or 7 and cross your fingers ..

What you might want to try is to connect the USB cable to the device and an open port on your PC and let it charge and see if after it has a full charge if you can power it on without having any other problem. Or if after it has a full charge if it is recognized by your PC as a connected device. If it has a full charge and recognized by your PC you should be able to use it without having any problem. Another solution is to download the updated firmware software, run the firmware update check your device and see if the display shows the Creative Labs logo if so you are in the clear and it should work without any other action needing to be taken on your behalf

the battery is dead use a car charger it worked on my creative zen stone plus and ipod touch. the car should charge it

My Zen Mozaic will charge when I plug it into the computer, but I can't access the files from My Computer and Creative Centrale says, "No Player is connected" when I click on the 'Transfer' button. It works on my other computer though, but that computer has a virus so i can't us

hey sweety,, i beleave u anne on the doin your head in thing,, have u tried the creative web site,,
they have a driver download thing u can use to fix your zen,choose the english site to download,,, itl scan 4 updates and fix the instalations u have,, try that 1st hun,, any more probs ,shout and il anserw,, or download u another driver 4 your zen ok sweety,,

if your pc reconises the zen ,then your there already,, bring up the the zen on the screen,click on browse your media,,then minimize the window,.then open up your music folder and minimize that window,, then u can drop n drag your music in 2 the zen,,or u can load a cd in2 your pc,, and a window pop up should appear, ,saying rip cd in,,, u click on creative,, then follow instructions,, hope that helps

you should ask her for the disk then put it onto your computer then try to charge it...if it dosent work try to reset it.

You will need to put the Zen into recovery mode and erase the firmware, then reload the firmware. Follow these steps:

To Erase the Firmware:

1. Get a paperclip and straighten it out.

2. Hold down the Play/Pause button, and put the paperclip through the reset hole. Release the paperclip while continuing to press the Play/Pause button until you see the screen change.

3. Select "Reload Firmware."

To Load the new Firmware:

Go to www.Creative.com/support --> downloads. Click through the navigation and download the latest Zen Touch firmware. Reboot your computer, then plug in your Zen via USB cable. Double-click the firmware icon and then click upgrade.

you should not have had to install anything for the Zen to work on Vista. If you have installed any Creative software, remove it. Reboot, plug your player in, open Device Manager, and remove the device that shows up representing your player (completely uninstall it). Reboot again, and plug in your player. It should be recognized now.

If that still doesn't work, then boot your player into Recovery Mode, and perform both a Disk Cleanup and a Reformat. Reboot the player and try plugging it in again.
if it still doesn't try another computer and upload the latest firmware to it and then try it on your pc after firmware is loaded