Need code for urc3220

Do you mean the URC 3220 from One For All? The RCA codes programmed into the unit are 0047 0019 0018 0090 0679
0747 1047 1147 1247 1347 1447 . The manual for the URC3220 is available here: http://www.voxxsupport.com/images/User%20Manuals%20-%20FAQ%27s/URC3220%20manual%20booklet.1.2.pdf . The directions for programming the remote are here: http://voxrightnow.custhelp.com/app/answers/detail/a_id/7725/~/programming-the-one-for-all-urc3220-universal-remote-control .


Note: if the TV is a 20F512T, it was built by TTE for RCA in ~2006. The URC3220 was programmed in early 2006. This may mean that your remote doesn't have the code for your TV. Universal remotes usually only have codes for devices released 6 months or more before the remote was programmed. You may need a newer remote.

I hope this helps.

Cindy Wells

Check these codes:
0054, 0706, 0030, 1454, 1254

I found that these websites should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/

www.remotecodelist, www.tvcodes.com, www.remote-codes.com

0180 or 0171

problem solved ty soo much ron t.

To search for a code for your TV:
On the remote control, press TV once.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
Enter 9 - 9 - 1.The LED will blink twice.
Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH+, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
To lock in the code, press and release SET.The LED will
blink twice.
To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
Hope this helps. :}

Use this link, i used it to get my URC-3220 to work on my cable box and my JVC TV, but you can find codes for other TV's/Cable boxes on there too.

http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

I was looking for hours online, I looked on these kinds of sites at least twenty times and tried all the suggested codes and websites and it didn't work, but I finally used 0171 for my URC-3220 universal remote control and it worked :).

Here is your manual
http://www.ofausa.com/remote_manual/URC4110%20manual%20booklet.QXD.pdf

Here are your codes
http://www.ofausa.com/list_codes.php?db_value=access4&remote_choice=URC4110