Dns automatically resetted to 85.255.0.0

Depending on the equipment you use to see Netfilx you should go to this official website and follow the steps Netflix Error NW 4 8

Changing TCP/IP settings Win 7 TCP/IP defines how your computer communicates with other computers.
To make it easier to manage TCP/IP settings, we recommend using automated Dynamic Host Configuration Protocol (DHCP). DHCP automatically assigns Internet Protocol (IP) addresses to the computers on your network, if your network supports it. If you use DHCP, then you don't have to change your TCP/IP settings if you move your computer to another location, and DHCP doesn't require you to manually configure TCP/IP settings, such as Domain Name System (DNS) and Windows Internet Name Service (WINS). To enable DHCP or change other TCP/IP settings, follow these steps:

1. Open Network Connections by clicking the Start button , and then clicking Control Panel. In the search box, typeadapter, and then, under Network and Sharing Center, click View network connections.
2. Right-click the connection that you want to change, and then click Properties. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
3. Click the Networking tab. Under This connection uses the following items, click either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties. The Network Connection Properties dialog box
4. To specify IPv4 IP address settings, do one of the following:
   • To get IP settings automatically using DHCP, click Obtain an IP address automatically, and then click OK.
   • To specify an IP address, click Use the following IP address, and then, in the IP address, Subnet mask, and Default gateway boxes, type the IP address settings.
5. To specify IPv6 IP address settings, do one of the following:
   • To get IP settings automatically using DHCP, click Obtain an IPv6 address automatically, and then click OK.
   • To specify an IP address, click Use the following IPv6 address, and then, in the IPv6 address, Subnet prefix length, and Default gateway boxes, type the IP address settings.
6. To specify DNS server address settings, do one of the following:
   • To get a DNS server address automatically using DHCP, click Obtain DNS server address automatically, and then click OK.
   • To specify a DNS server address, click Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary DNS servers.
   The Internet Protocol Version 4 (TCP/IPv4)Properties dialog box
7. To change advanced DNS, WINS, and IP settings, click Advanced.

Try changing your DNS settings on the PS3 or on the router
Changing the DNS on your router: Go to 192.168.1.1 Default password is: admin Static DNS1: 208.67.222.222 Static DNS2: 208.67.220.220
Those DNS setting are from OpenDNS
After doing this, reconnect your PS3 to the router and set it to Automatically adjust the settings. Once you have reconnected, check if you are still having the DNS problem.
If you are still experiencing the problem, try changing the DNS directly from the PS3 Go to Internet Connection Settings and set everything to Auto except DNS When asked if you should set the DNS automatically, choose "Manual" Input the same DNS settings: Static DNS1: 208.67.222.222 Static DNS2: 208.67.220.220

Follow the following steps to change your TCP and IP Settings on Windows Vista

1. Go to the Control Panel from the Start menu.
2. Click "Network and Internet" and then "Network and Sharing Center."
3. Click "Manage network connections."
4. Choose which Internet connection you would like to change if you have more than one. Right click on it and select "Properties."
5. Click the "Networking" tab.
6. Choose Internet Protocol Version 4 (TCP/IPv4)
(Note that "Obtain an IP Address Automatically" works fine generally)
7. Click "Use the following IP Address" to enter your own IP settings.
- Enter IP address (eg. 192.168.1.125) into the box marked "IP Address, press tab "Subnet Mask" would appear automatically (255.255.255.0) and in "Default gateway." type 192.168.0.1.

To specify DNS server address settings, do one of the following:

- To obtain a DNS server address automatically, click Obtain DNS server address automatically, and then click OK.
- To specify a DNS server address, click Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary DNS servers.(which can be obtained from your internet service provider (ISP).

For visual help, check out step by step guide here
Hopr it Helps!
CreativeTECH

You may have to reset the modem and start over with the new service provider network.

hi

Go to the Control Panel from the Start menu.

Step 2 Click "Network and Internet" and then "Network and Sharing Center."

Step 3 Click "Manage network connections."

Step 4 Choose which Internet connection you would like to change if you have more than one. Right click on it and select "Properties."

Step 5 Click the "Networking" tab.

Step 6 Choose either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6).

Step 7 Click "Obtain an IP Address Automatically" to reset your IP address automatically, then click OK.

Step 8 Click "Use the following IP Address" to enter your own IP settings.

Step 9 Enter your IP address into the boxes marked "IP Address," "Subnet Mask" (or "Subnet prefix length for IP/TCPv6) and "Default gateway."
Change your DNS Server Settings

Step 1 Click "Obtain DNS Server Address Automatically" and then click "OK."

Step 2 Click "Use the following DNS Server addresses" to change your DNS Server settings manually.

Step 3 Type your primary DNS Server address into the box that says "Preferred DNS Server."

Step 4 Type your secondary DNS Server address into the box that says "Alternate DNS Server."
Add a New Network Protocol

Step 1 Click "Properties" and then "Install" from "Manage network connections."

Step 2 Click "Client," "Service" or "Protocol," depending on which you wish to add. Then click "Add."

Step 3 Select the item you want to add from the dialogue box and click OK.

On your computer, Click on Start and then RUN and type CMD... on the black screen/DOS prompt type there FlushDNS and press enter, this will clear out the DNS and should work

Renew your DNS configuration or change the DNS settings to Obtain DNS server address automatically.You can change that in your network connection settings.

when you set up your connections, turn dns off, then reset the connections and let it set up automatically

Hey peterk18,

First of all, how is your network configured? Are you behind a router? What's it's IP adress, does it act as a DHCP server?

If so try to set up a new network connection and put everything to automatic.. When the routers acts as a DHCP server it will give the PlayStation 3 an IP adress. DNS however is something else. DNS is a system that allows you to browse by a website or hosts name. For example: it allows you to type www.google.com in your browser instead of it's IP.

DNS is essential for Internet. Your router should be your DNS server and your router itself also needs to know a DNS server, this would be the server from your ISP. All these settings are automatically configured via DHCP.

Greetings,

DarkNeogen