At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My almost new Balance CM2015 monitor is giving the message RGB no input signal. It does recognize when the cable is disconnected. I checked the cables none are loose. I also tried to hook it up to my lap top to see if it was a problem with the tower/ video card/ motherboard… When I hooked it up to my laptop it worked for 10-20 seconds before it went black and then said “ RGB no input signal” again. Is there any hope to get this thing to work?
my almost new compac does that it goes on stand by for a bit then when i shake the mouse and press space it comes on but is a black screen with a red outlined box saying rbg no iput sinal and i am getting wound up with it coz i got to press the green button it and do that 2 times to get it only just working and i check the cables (cant find the right pic )my almost new compac does that it goes on stand by for a bit then when i shake the mouse and press space it comes on but is a black screen with a red outlined box saying rbg no iput sinal and i am getting wound up with it coz i got to press the green button it and do that 2 times to get it only just working and i check the cables (cant find the right pic )
my almost new compac does that it goes on stand by for a bit then when i shake the mouse and press space it comes on but is a black screen with a red outlined box saying rbg no iput sinal and i am getting wound up with it coz i got to press the green button it and do that 2 times to get it only just working and i check the cables my almost new compac does that it goes on stand by for a bit then when i shake the mouse and press space it comes on but is a black screen with a red outlined box saying rbg no iput sinal and i am getting wound up with it coz i got to press the green button it and do that 2 times to get it only just working and i check the cables
You can't post conmments that contain an email address.
You need to change the input signal, get into the menu on your monitor and change the signal from rgb to dvi, hdmi or vga dipending on what cable you using for connection.
There is NO rgb connector on that monitor
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
A "Balance CM2015" is a color monitor, not a printer.
Why do you want to make your own cable? Just go to local store and purchase a 9 pin video cable.
Don
REMOVED THE 15 PIN PLUG - I GET A SCREEN MESSAGE - SYSTEM CABLE DISCONNECT! WHEN I PLUG IT BACK IN THE MESSAGE RGB NO INPUT SIGNAL
APPEARS FOR A FEW SECONDS THEN THE MONITOR GOES INTO STANDBY AND THE
SCREEN STAYS BLANK,
I ALSO PLUGGED THE MONITOR INTO MY LAPTOP AND THE SAME MESSAGE APPEARED
You first take post( power on self test) connect power cord & disconnect signal cable you will see massage no signal check siganl cable then problem will be in cpu this problem may be solved by cleaning dust in cpu if montor shows no display then problem will in monitor open it check o/p of smps if not disolder path of eht if o/p comes then eht is faulty replace it
I know this is not the right way to do this but try installing the drivers for your new monitor while using your old monitor the re-boot the computer still with your old monitor attached. When you are satisfied the new drivers are in a location easy to find turn off and attach new monitor. If you are still getting that message try it with another computer. If this message still persists there is a fault with the RGB cable input board so if you can return it or have a competant technician have a look. Hope this helps.
my almost new compac does that it goes on stand by for a bit then when i shake the mouse and press space it comes on but is a black screen with a red outlined box saying rbg no iput sinal and i am getting wound up with it coz i got to press the green button it and do that 2 times to get it only just working and i check the cables (cant find the right pic )
my almost new compac does that it goes on stand by for a bit then when i shake the mouse and press space it comes on but is a black screen with a red outlined box saying rbg no iput sinal and i am getting wound up with it coz i got to press the green button it and do that 2 times to get it only just working and i check the cables
×