Today my Kenwood Auto Changer KDC-C717 gave me the E-99 error and now I can't eject the disc magazine anymore. When I press "eject" I only hear a "noise" but nothing happens.
The auto changer is connected to a Kenwood cario radio system KRC-758R
What can I do?
Reset the unit ithe reset button is on the cd changer
There is probably a jammed disc or disc holder. It cant eject the cartridge because the unit cant put the disc back into the cartridge to the left.
Took me a about 20 mins gentle persuasion after removing the plastic front (carefully depress the little plastic clips on the edges and (again, gently, lever the front off) and removing the metal case - half a dozen screws each side and remove the bottom. The top stays fixed to the workings. I could then get into the gap between the top case and workings but be careful not to pull the unit from the rubber antishock mountings etc. and remove the problem disc.
I removed the plastic fascia which surrounds the magazine hole too, not sure if it was necessary..!
Again - be careful not to be rough with it, you dont want to snap the plastic clips, etc and also check the horizontal/vertical adjusters are back on in the correct position if they come off.
3,532 views
Usually answered in minutes!
i have the same problem
×