Can't get the refrigerator through the door ; how to remove handl

The screw heads may be inside the door cavity, screwed into the back of the handles.
If this is the case, as with our Fridge-Master fridge/freezer, it is very difficult, needing strip down of door.
Good luck... :)

Jeff, If you can not see any visible screws, look for molded removable trim caps on the handle, remove and tighten screws. If no trim caps then your handle is probably mounted to fridge with screws in slotted slide, which get slid off by pulling straight up on handle, normally takes a lot of force to slide up and out. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to fix loose Refrigerator Handle
How To Fix Your GE Refrigerator Handle by removing the cap and tightening...
Refrigerator Door Handle How To Replace
Refrigerator Repair Replacing the Door Handle Frigidaire Part 218428101

Search Results

Refrigerator Door Handle - How To Replace - YouTube

? 2:54
https://www.youtube.com/watch?v=O5q0WhxMfmQ
Sep 17, 2012 - Uploaded by AppliancePartsPros
Follow these simple step-by-step instructions to replace theRefrigerator Door Handle on Whirlpool, Maytag ...

How to remove or take off Whirlpool fridge door handles ...

? 2:22
https://www.youtube.com/watch?v=tmYz4FVqVnw
Oct 3, 2014 - Uploaded by way22good1
How to take off whirlpool refrigerator door handles. ... How To Fix Your GE Refrigerator Handle by removing ...

Whirlpool Refridgerator Door Handle removal - You

Please check this link and see if there is some tips that can help you fit the handle:

http://www.espares.co.uk/advice/fridges-and-freezers/a/2/1435/how-a-fridge-works.html

Are you sure...
To move refrigerator through a house door, it may be necessary to remove the refrigerator door handles.
NOTE: Handle appearance may vary from illustrations on this page.



1. Removing Refrigerator Handle
• Grasp the handle tightly with both hands and slide the handle up (1)(this may require some force).

• The keyhole slots (2) on the back of the handle allow the handle to separate from the mounting screws (3).

CAUTION: The handle could be damaged if you hit it with a hammer while removing or attaching.

CAUTION: When you assemble or disassemble handle, you must push or pull with reasonable force.

there are two screws on each side of the bottom freezer unit you need to remove. they can be removed after de-installing the front bin with the two plastic sleeves on the right and left. Then you can remove the bottom drawer door and the bins inside. next, open both top doors and angle the fridge with one door inside the door frame, then "walk" the fridge over the doorstoop, turning towards the inside door as you push. Follow thru with the rest of the unit, then re-attach the bottom drawer.

Hi, Please get me the model # from the label inside the refrigerator and I will look this up for you. Most handles have a set screw that tightens down.

Vic

The handles are probably attached with screws from the back -- this will require removing some panel(s) to access them.

If this is a side by side door refrigerator you can not move the doors or the handles.

Phil

this should be expired.